Nakamichi RX-505 Uni-Directional Auto Reserve. Without noise reduction, of course. AKAI GX-95 without noise reduction, superb level/bias calibration & peak value display ! Both have excellent sound quality.
Chime in.What's the Best Cassette Recorder ever ?
I just recently purchased a used Teac V-900X from a local
used Hi Fi shop and was amazed at the specs of the machine,But more amazed at the sound coming from this unit. I had my CD of Ray Sings Basie Swings and dubbed it onto my Teac cassette recorder with DBX fully engaged on the machine and levels kept at 0 DB or -4 on peaks with my Maxell New XLS Type 2 tape. All I could say was WOW, WOW.
The tape copy had lower noise then the CD and more dynamic punch. I used my old Mit 330 Cable as a dubbing cable from my Toshiba DVD SD 2705 to the Teac. I know thats not much of a front end for playback, But I do not have hardly any Cd's in my collection just tapes and reel to reel live recordings along with a huge collection of live Dat recordings as well .
I did some research on the net and came upon the specs of the Nakamichi 1000ZKL. The freq. response is better then the Teac, But the Teac is no slouch either.
The owners manual on the Teac V-900x state Freq. response 30 to 21k + or - 3 DB. Signal to noise 92 DB(dbx in at 1K,
dynamic range 110 DB DBX IN, 1KHZ PEAK LEVEL. I opened the lid to the machine and I noticed it only has one belt in it not the typical 8 or 9 belts seen in others. The machine has 3 motors 1 DC FG SERVO DD capstan motor,1 DC REEL MOTOR,1 mechanism control motor.Now all I need to do is snap up as many virgin Sealed Metal Tapes I can get my hands on and then have some real fun. I will be recording live on the Teac V 900x next week with a small symphonic community group and will report my findings to all of you on how it holds up to a live recording which I am sure will be a challenge to keep the meters at 0DB.
In the past I have heard the Nakamichi machines most all of them along with the Revox decks as well and I cannot recall the noise levels down as much as this machine can do along with the dynamic range as well.
Waiting for your comments
Don
used Hi Fi shop and was amazed at the specs of the machine,But more amazed at the sound coming from this unit. I had my CD of Ray Sings Basie Swings and dubbed it onto my Teac cassette recorder with DBX fully engaged on the machine and levels kept at 0 DB or -4 on peaks with my Maxell New XLS Type 2 tape. All I could say was WOW, WOW.
The tape copy had lower noise then the CD and more dynamic punch. I used my old Mit 330 Cable as a dubbing cable from my Toshiba DVD SD 2705 to the Teac. I know thats not much of a front end for playback, But I do not have hardly any Cd's in my collection just tapes and reel to reel live recordings along with a huge collection of live Dat recordings as well .
I did some research on the net and came upon the specs of the Nakamichi 1000ZKL. The freq. response is better then the Teac, But the Teac is no slouch either.
The owners manual on the Teac V-900x state Freq. response 30 to 21k + or - 3 DB. Signal to noise 92 DB(dbx in at 1K,
dynamic range 110 DB DBX IN, 1KHZ PEAK LEVEL. I opened the lid to the machine and I noticed it only has one belt in it not the typical 8 or 9 belts seen in others. The machine has 3 motors 1 DC FG SERVO DD capstan motor,1 DC REEL MOTOR,1 mechanism control motor.Now all I need to do is snap up as many virgin Sealed Metal Tapes I can get my hands on and then have some real fun. I will be recording live on the Teac V 900x next week with a small symphonic community group and will report my findings to all of you on how it holds up to a live recording which I am sure will be a challenge to keep the meters at 0DB.
In the past I have heard the Nakamichi machines most all of them along with the Revox decks as well and I cannot recall the noise levels down as much as this machine can do along with the dynamic range as well.
Waiting for your comments
Don
- ...
- 53 posts total
- 53 posts total