i used the white lithium grease as recommended. i put about a pea sized drop on my finger and then touched it to the top of the spindle ball bearing. i'm glad i did this too, did not appear to be too much grease remaining.
on the motor i put the same oil i use on my car, castrol syntec. found a old quart, squeezed a drop or two out then layed the motor on its side and put two drops on the shaft just below the belt pulley.
on the motor i put the same oil i use on my car, castrol syntec. found a old quart, squeezed a drop or two out then layed the motor on its side and put two drops on the shaft just below the belt pulley.