Oppo 95: Burn-in...and Fan

It sure will compete with the upper end, in fact it is the upper end!dedicated or not.

Awesome Jdub39 - extremely helpful...just what I was looking for! I just got the Oppo 95 today (replacing an Oppo 970 which has been one of the absolute best values I've encountered) - was hoping to give my analog some competition (it's not an easy life being the digital front end in my system - just look at my user name)...'listenable but restrictive' describes exactly what I'm hearing now (but I am aware of the importance of 'burn-in').

I think I've set it up for maximum 2-channel audio only performance (basically what it says in the manual) - do you guys have any 'not so obvious setup setting' recommendations here that you've A/B:ed (listening comaparisons)?

While I'm at it I just have to recommend experimenting with some small myrtle wood block supports under the components (I use 3 under each - one middle front and one in each 'back corner') - it always surprises me that it makes such a noticable difference...it's cheap and you might like it too.

I tried the pure audio "trick" at the start of my listening session today and within 30 min the fan kicked in. I am fortunate that I am far enough away from the unit it does not affect the music. As info there is about 1.5" clearance above the unit and it rests on blocks made of cork & rubber - maybe another 3/4" clearance underneath it...

I went a couple of rounds with vibration control I tried BD #3 cones with and without there new carbon fiber disc and also Herbies tender feet, in the end I found better results with the stock feet and an upgraded VTI rack asymmetrically filled with 75% stainless steel bb's and 30% sand. I used some of Herbies grunge buster dots between the rack and shelves.I do have a question though are you using xlr or rca's? My first round with the 95 was with the rca's and could have lived with them not knowing any the better. I went balanced outs 3 months ago and it took about another 400 hrs to settle back in and to be honest at first I felt the overall balance was thin in comparison to the wonderful sounding rca's. To be sure there would be a difference in sound quality after adjusting the gain and such, I used the same cables both where AQ Columbia's rca and xlr. Now for awhile there the xlr's where about to go back but cooler heads prevailed and as I type this the beautiful brass from Bruckner's 9th Paavo Jarvi sacd via xlr was well worth the wait and I now use xlr exclusively for 2 channel playback. But back to the myrtle wood blocks I may have to check it out and try again.

Thanks for the tip!

Hi Go4vinyl,

I'd definitely be sure you use "Pure Audio". I now have 250 hours on mine. It's clearly getting better.

Has anyone compared a stock 95 to a modified one? If so, I'd be very curious what you heard.