Subwoofer with XP-22 in unity gain


Given the Pass Labs XP-22 is set for Unity Gain on input 1, can I connect my sub to an RCA output and be able to feed the subwoofer?

Notes:

  1. I am not using volume control on the MSB DAC
  2. I currently have the sub plugged into the AVR
  3. I know there is no real point to the XP-22 in the diagram - still want to know if this will work tho

 

goleksiak

@goleksiak, the 89db setting is just telling the user where on the volume scale is 0db, i.e. no gain or attenuation.  Also, if you set input 1 at 89, all other inputs by default will be set at 89. This could be a recipe for disaster.  Why not use the Home Theatre pass thru on input 5??

@audphile1 if system volume is set to 89 (0db gain) then what is the harm in switching to another line level input (say a phono)? 

Switching inputs on XP-22 maintains the previously set volume level.
If you have a digital source playing at that time you will pump that signal thru at 89 on volume scale when you switch to that input.
I hope that’s clear enough. What that means is a unity gain signal burst thru your entire system. What will be the outcome of this? Potentially fried component or speaker driver, including temporary damage to your underwear.

Use bypass for your AVR and don’t screw around. You will potentially learn a painful and expensive lesson otherwise. It is bound to happen. 

@audphile1 Ok. I'm new to all this which is why I'm asking... So I think I'm missing something about sources: Reading my MSB manual, it has Low (-6db) and High ("Standard"db) output settings. So sources can present to the preamp with different voltages....did not know that before. Is switching between sources with these differing input voltages what would cause the potential overload? (Or do preamps always expect to receive the same input voltages across sources)?