Looking for 200 watt Amp to drive Dynaudio Heritage speakers


Hi Everyone - 

BACKGROUND 


A few years ago, during Covid and after having worked for so many years without really treating myself to a sound system, I took the plunge and started purchasing audio equipment. Unfortunately, I was a terribly uninformed audio buyer and dove in with some purchases that were not terribly well considered. Oh well. 

So here we are today... I have a pair of Dynaudio Heritage Special speakers that I was considering selling.

The Dynaudio Heritage Special speakers require power to open up. Driven at 100 watts, they sound a little anemic and the treble dominates at lower levels. So they ended up in the closet for the last year with plans to sell them. In retrospect, the dealer I purchased them suggested a lower wattage amp than was advisable. 

For my primary system, I'm now running QLN Prestige Three speakers with a Conrad Johnson Classic 120 EL34 amp, LTA Microzotl preamp, Merason DAC1 and Innuos Zenith. The sound of this system is wonderful - ethereal, nuanced, great soundstage and imaging. Very relaxing combo. 

I'm thinking of cycling the Dynaudio into circulation for a few months a year to change things up. I'm looking for a 200 Watt Solid State Amp. But here's the thing, I'm getting older and lugging heavy things around - especially when stairs are part of the equation - is terribly unappealing. 50-55 pounds is pretty much my limit right now.  

I had some Pass Labs amps in for home demos and the thing was a back breaker. I think it was 80 pounds or so. My days of pseudo body building are over... so lugging that thing up and down stairs is something I NEVER want to do again. 

QUESTION FOR THE FORUM 

Can anyone suggest a reasonably priced solid state 200 watt SS amp - no more than 50-55 pounds - that I can use to enjoy these Dynaudio Heritage Speakers? Class AB or Class D, obviously. For weight considerations, I'm really open to a Class D amp, assuming it sounds good. 

Budget is $5K or under - new or used. 

In terms of what I'm looking for - and given my weight requirements - I'd say the primary thing I'm looking to avoid is overt brightness. Otherwise, I'm pretty open to what suggestions the forum might have. Thanks in advance! 
 

128x128bluethinker

So I decided to give the Dynaudio HS speakers a whirl with the Conrad Johnson amp which is 125 watts per channel. I didn't expect much, but was sort of blown away. The CJ amp totally opened up the speakers in a way I didn't expect and made me realize I can get away simply powering them with the CJ amp. 

@bluethinker The difference between 100 Watt and 200 Watts is 3dB, which to the ear is barely noticeable. As you found out this is really more about how the amp plays with the speaker than it is power.

There are some things to consider when using tubes with 4 Ohms. First, although tube amps have 4 Ohm taps, the output transformer often loses an octave of bandwidth between 8 and 4 Ohms because its less efficient. This loss, which is usually less than 20Hz, results in less impact due to phase shift in the bass. If you measure the temperature of the output transformers with a thermal camera you'll also see they are running warmer into 4 Ohms- and that heat is power made by the output tubes.

You'll also find that the speaker cables are far more critical using 4 Ohm speakers so its best to keep them as short as possible (an argument for monoblocks). This is particularly true of tube amps which tend to have a higher output impedance.

There are class D amps now that don't take a back seat to tube amps of any kind in any way (except overload character) that can make the power you were asking about.

@atmasphere - Thank you. I appreciate the detailed write-up and explanation. I know your class D amps are well regarded and am a bit surprised they were not suggested earlier in the discussion. Food for thought for me moving forward. 

"The Dynaudio Heritage Special speakers require power to open up. Driven at 100 watts, they sound a little anemic and the treble dominates at lower levels."

Your comment in the OP is probably the reason they were not recommended, because they are only rated at 100 wpc into 8Ω.  Not saying they wouldn't work for your music, room, and those speakers, but you might want to make sure there is a return option.

@grislybutter - I tried to upload a photo but wasn't able to on first try months ago. I'll try to find some time this weekend to share my set-up. It's been a labor of love putting everything together and happy to provide a photo for you and the forum.