Evaluating Equipment-induced EMI noise in one’s audio system


Audiophiles have long recognized power line noise as the bane towards enjoying one’s audio system since at least the 1970’s (if not earlier). Folks appreciate their rigs often when the power grid has lower traffic during off-peak hours, such as late into the evening. More recently, perhaps beginning in the mid-1980’s or so (please don’t hold me to dates here, as I’ll stipulate I might be off on time), audiophiles have employed numerous devices such as power conditioners, power line filters, power regenerative devices, even battery-driven gear as a way to reduce power line noise getting into one’s system. And many of these devices actually work as claimed. But in this thread. I want to explore the extent to which the audio equipment, itself, whether a power line noise treatment device or an essential or auxiliary piece of audio electronics component introduces EMI or RFI noise into one’s system. I’ll describe a simple, inexpensive tool and method to evaluate any component’s inherent line noise. And whether one should use that as a guide to accept or reject a given audio component in one’s system. I will present my findings for two well known components familiar to most folks here in the forum. One will be a power conditioner that regenerates a corrected AC power signal. The second component will be a Class D amplifier and external power supply. Buckle up and let’s have some fun! 

128x128celander
Post removed 

Conditions with conventional duplex wall outlet; EMI Noise Level measurements from TriField EM100. 

Test audio component: a Class D monoblock amplifier brand Z with detachable, independent 300W GaN power supply. 

TriField EM100 connected to wall outlet 1 of 2 with nothing connected to wall outlet 2 of 2. 

EMI Noise Level: 22.6 mVp-p AC

TriField EM100 connected to wall outlet 2 of 2 with inothing connected to wall outlet 1 of 2. 

EMI Noise Level: 22.2 mVp-p AC

TriField EM100 connected to wall outlet 2 of 2 with Acoustic BBQ power cable connected to wall outlet 1 of 2. 

EMI Noise Level: 23.7 mVp-p AC

TriField EM100 connected to wall outlet 2 of 2 with only 300W GaN power supply connected to wall outlet 1 of 2 via the Acoustic BBQ power cable. 

EMI Noise Level: 25.3-25.8 mVp-p AC

TriField EM100 connected to wall outlet 2 of 2 with Class D monoblock amplifier brand Z connected to 300W GaN power supply connected to wall outlet 1 of 2 via the Acoustic BBQ power cable. 

EMI Noise Level: 54.8-61.9 mVp-p AC

TriField EM100 connected to wall outlet 2 of 2 with Class D monoblock amplifier brand Z connected to 300W GaN power supply connected to wall outlet 1 of 2 via the Acoustic BBQ power cable. (XLR input closed by XLR-RCA adaptor with RCA EMI/RFI blocker cap.)

EMI Noise Level: 67.0-81.2 mVp-p AC

My conclusion: While the 300W GaN power supply didn’t significantly increase EMI noise in the power line, the full Class D monoblock amplifier brand Z with the 300W power supply increased EMI noise by over 2-fold. I’m not certain whether such an increase in EMI noise will necessarily be audible, but it is present. 

@steakster I agree with everything you said in your recent post. I also don’t listen to my system with a TriField EMI measuring device. But I’m finding it as a useful tool to quickly decide whether a given component contributes significant EMI noise to the power line of the audio system. What remains to be assessed is the correlation of EMI noise to audible discernment of sound quality degradation as a result. 

Put a piece of shungite near the wall plug and measure it ...Cover the power supply with a plate of shungite...Neasure before and after ... Have fun...

Just a test... 😊

Merry Christmas to you and your family... 🎄