Accuphase AC-3 Re-tip new cantilever vs new purchase?


I was looking at a used Accuphase and sending it out for a new stylus and cantilever.

I wonder if this is a good use of 2k or if I should be looking for a new cartridge in the same price range that would provide the same quality.

Does anyone have experience with the Accuphase AC-3? Or an opinion about its quality compared to new products on the market?

Thanks for the advice.

kjim

Doesn't it all boil down to how much you have to pay for the Accuphase vs whether you have prior experience to suggest you like that particular cartridge vs what is the condition?  If you estimate the total cost after "re-tipping" (a euphemism for either replacing the stylus only or replacing both the stylus and cantilever) to be around $2K, that to me suggests you are looking at paying at least $1500 for the cartridge alone.  I have no solid idea what an Accuphase AC3 ought to cost, but that seems high for one that needs repair.  Others may know better. Then there is the question of why you are choosing this particular cartridge.

You are absolutely right.

The re-tip w/new cantilever is $500 and these cartridges seem to be around $1500 (with shipping and tax) so...

I’m gaming out worse case scenario - I buy a used AC-3 and it needs work. $2000 spent for my ’ideal’ cartridge.

I wonder if I’ve convinced myself that this is the ideal cartridge at this price or if there are better values for the money out there considering my set up and listening.

My signal path looks like this:

VPI HW-19 that is more or less something else -

SOTA motor in a standalone motor mount

SOTA Condor and Roadrunner PSU and Tachometer

Origin Live Illustrious tonearm

VPI super platter + moded arm board and

Dynavector 20x2H MC

Icon Audio PS1 MkII phono all tube pre-amp

Hegel H390 integrated

AudioPhysic Tempo loudspeakers

I listen to Jazz, folk, ambient, Afro beat, classical..not a lot of densely produced rock or pop. Looking for soundstage, separation, and detail.

 

Thanks for advice on a new cartridge or suggestion to stick with the Dynavector.

The AC 3 has a Armature that is quite unique being a Hollow Rod produced from both Boron/Beryllium. 

My comparisons of Carts of the same design, but with some having undergone modification where one model has Beryllium as the armature, has shown that Beryllium is able to produce a very attractive sonic and in the comparisons, Beryllium is the one I have preferred over Boron, as a general description, the Upper Mid's are able to be perceived with a much improved clarity, at the expense of a tightening of the Bass.

As the Armature on the AC 3 is a unique selling point for the design when originally marketed, I would suggest inquiring if the Armature on the AC 3 can be maintained during the refurbishment process. 

There might be much more cost effective routes if Solid Boron become the only option to compete with the original armature on the AC 3.

You may also have experience with the AC-2...these are more widely available. How does one compare to the other?