2. speakers
  3. 184546-182401

Maggie LRS+ terminal issue

​Does anyone have any idea of why I can't get any kind of banana plug into the back of one of the Maggie LRS+ panels? The stock holes are supposed to be the same width, yet this doesn't seem to be the case. No matter what kind of plug I try, it won't go in.
Please see video attached. It shows that it's not the banana plug itself, as it fits into the other slot (that's just for demonstration purposes - I'm aware of hooking positive and negative correctly).
 
Any ideas?

http://<iframe src="https://drive.google.com/file/d/1ZXQtHHhIaBtB4xJiv6Rd4dVScoQ1uIFq/preview" width="640" height="480" allow="autoplay"></iframe>

chason678
ketchup
688 posts
 

Yes, bananas work fine.  Unscrew the set screw, insert the banana, then lightly snug up the set screw on the part of the banana that tapers down.

jl35
3,936 posts
 

I had LRS and LRS+ and both accepted the bananas on my Analysis Plus and Cerious GE cables...yes, you must loosen the screw on the terminal initially...

chason678 OP
3 posts
 

I see - just backed out the screw, made an adjustment on the top set screw that was in too far, and voila - success! Thanks secretguy and ketchup

More to discover