Can This Really Matter?


I hear it again and again, everything matters in the digital chain. So I recently unboxed my new Bryston BDP 3 renderer and it’s connected to my Ayre QB9 Twenty USB DAC. I have a SSD inside a generic enclosure (with a fan) that will power up via bus. I have a twenty cent USB cable running from the SSD to the Bryston. So here’s the question, does the enclosure matter and does the cheap USB running between between the SSD and into the Bryston really matter? If so, it wouldn’t seem practical to spend much money on upgrading these accessories. And if so, what do you suggest?

goofyfoot

@ghdprentice Of course there's no sound aspect coming from the SSD, it's strictly a matter of moving data, so I don't know how to determine which cable upgrade to settle on. My guess would be to just pick a price point and done.

@cleeds I'll probably send the unit back to Bryston to have a SSD installed but it will be a while from now. My thought is that having an internal SSD installed means that I could potentially loose all of those files, for example in doing a factory reset.

I’ll probably send the unit back to Bryston to have a SSD installed ... My thought is that having an internal SSD installed means that I could potentially loose all of those files, for example in doing a factory reset.

Bryston or your dealer can install the SSD for you but it’s not difficult to DIY. The BDP-3 system files are independent of the SSD, so you can do a system reset without affecting your files. I wouldn’t provide you that assurance without personal experience.

@goofyfoot,

"does the cheap USB running between between the SSD and into the Bryston really matter?"

I'm also running Ayre QB-9 TWENTY, and noticed a very significant improvement when switching out from a Belkin USB cable to Cardas Clear.  Not very pricey, they go for  around $200.  Not sure if it has an effect, but it is known that Ayre internal wiring is Cardas sourced.  Hope this helps.

@sandstone The USB cable I'm running between the Bryston and he Ayre is a Wire World Platinum Starlight, their best USB cable. So today, I ordered a Wire World Chroma 8 USB 3.0 to run between the SSD / Enclosure and the Bryston. I'm thinking the transfer of data will be a lot faster. Also the shielding and gold plated terminations might help.

I went with a AudioQuest Diamond USB B Cable, but I'm sure the Wire World will be fine.

LAN cables are just a susceptible to interference as all other cable types. I'm using DbillionDa Cat8 Ethernet Cable with 4 shielded foiled twisted pair(F/FTP).