Peachtree GaN 1 Beta


Before I start my post here is my current system for reference:

Auarlic Aries G1 --> Denafrips Terminator or SW1X DAC --> Audio GD HE1 XLR preamp or Sachs preamp --> various tube amps --> Cube Nenuphar Mini's w/ a pair of REL S510 subs. Cables and power conditioning commensurate with the rest of the system.

__________________________________________________________________

As warmer months approach I have been looking for a cool running amp to replace my Line Magnetic LM-518 and other tube amps for a few months as they run pretty hot.

I've been interested in the GaN FET amps and just purchased a used LSA Voyager 350 Gan FET amp which I should receive in a few days. I've tried class D amps before and while they checked a lot of boxes I just didn't feel drawn in. However, I like to explore so I figured I'd try the GanFET and since the amp has zero feedback and my speakers seem to prefer amps with little or no feedback I figured it be worth checking out.

Today, Peachtree Audio sent out an email inviting users to a beta of their new Gan 1 amp. Here are some excerpts from their email:

 

What is the GaN 1?

In basic terms it is a 200 Watts-Per-Channel (WPC) Power Amplifier designed to be the sole interface between your digital audio device with a variable output, like a Bluesound NODE, and your speakers. The GaN 1 is a simple, pure and cost-effective audio solution: connect the GaN 1 to a streamer and a pair of speakers and you have an amazing Hi-Fi system. That's it...no DAC, no preamp and no input switching. The signal path from the music to your speakers is remarkably short and free of artifacts. Want to hear the intricate details in your music that have always been there, but you couldn't quite make them all out before? Then the GaN 1 is for you!

What makes the GaN 1 so special?

First and foremost is the GaN-FET amplifier module. It has several inherent advantages in a power amplifier that even the best MOS-FET designs simply cannot achieve. A GaN-FET power stage provides a precise high-power reproduction of the Class-D PWM signal with extremely high linearity. This linearity eliminates the need for ANY feedback, ultimately allowing for the best possible audio quality providing clean, clear middle and high frequencies and a tight, solid reproduction of low frequencies. GaN-FETs track the complex audio waveforms MUCH more accurately than MOS-FETs, resulting in significantly more transparent and natural sound. The difference is something even a casual listener can hear and appreciate. The GaN 1 is also designed so that it does NOT require a digital-to-analog-converter (DAC). The digital audio signal at the input directs the amplifier outputs to drive the speakers. Although DACs have continued to improve over the years, there is no DAC better than NO DAC! This concept is not new as similar devices known as "Power DACs" made quite a splash in our industry years ago. But this time around, by executing the concept with GaN-FETs, the bar is raised to an entirely new level.

Key Features at a Glance:

▪ 200 WPC state-of-the-art GaN-FET module
▪ ZERO feedback design
▪ Regulated 450-Watt power supply
▪ Coaxial S/PDIF input with native support up to 24-bit / 192kHz
▪ DAC-less design
▪ Power on/off trigger port
▪ All aluminum chassis
▪ No cooling fans

 

This sounded really interesting to me and since I have a good streamer I signed up for the amp beta only. One aspect that intrigues me is to create an extremely minimal signal path. My speakers are single driver, crossover-less design. Employing the GaN 1 will mean the system will be Auralic Aries --> GaN 1 --> Cube Nenuphar Mini's. Will that lead to a more engaging sound vs the full system? Will the Voyager GaN 350 outperform a tube amp in the full system? Who knows, should be fun to find out....

Now, I have no idea how either of these GaN FET amps will work with my speakers. The Cube Nenuphars seem to prefer amps with low damping and no negative feedback, which is more common with SET tube amps and Class A solid state amps. I'm not sure of the damping factor of the GaN FET amps, but both are Zero feedback designs, and both have way more wattage than I need. For reference, I have a 1.5 wpc 45 tube amp that sounds amazing with the Cubes, so high wattage is not required. I am interested though in what these amps will sound like compared to my tube amps, and I am particularly interested in what the streamer direct to amp Peachtree will sound like.

I am also looking to acquire a First Watt SIT-3, which is a great match with the Cubes, but now that they are no longer produced prices have gone above my current comfort level. If I can get one I will throw it into the experiment.

The Peachtree won't be shipped until sometime in June, or possibly later. In the meantime I will get the LSA Voyager in the next few days. I might even be able to get it hooked up this weekend so stay tuned, should be an interesting experiment...

abd1

BTW, the GaN 1 digital board measures almost the same frequency response as the board in the GaN 400 (analog input board). It is one db down at 20K using a 4 ohm load. This will give less than one quarter db attenuation at 10K......no one can hear this. However, with a 2 ohm load it is 2db down at 20K.....so it will make 10K down one half db.....maybe you could hear this. OMG this is so horrible!!!! (Kuribo speaking here). There is maybe one person in 100 with a speaker that MAYBE you could hear the rolloff.......I don’t hear much above 10K myself. There are a couple of electrotats that have very low impedance at 20K and there are a handfull of regular speakers that have a 2 ohm tweeter load.......but very, very few. Just go to stereophile mag and read the measurements of various spekakers they have reviewed lately....only the Kef Blade 2 goes a little under 4 ohms at 10k.....all the rest are above 4 ohms......just not an issure.

So, thinking you need feedback and op amps and DACs and Preamps and analog cables so you do not have this very slight problem that practically no one will hear is simply silly. But, some people make mountains out of mole hills.....hey, I get excited for positive things.....some people get excited to put things down.

I like UP myself. I say Yes to life.....and Blessings to all......how about BLESSESS......Beautifully Love Every Single Soul Every Single Second

@ricevs I figured the the Illumati would be better than stock. Maybe, maybe not. It is a damn skinny wire. Added a couple of pics to my profile.

I may try using some Triple C copper as the interconnect.

Kinda cool that a $1500 box can have so much potential. It is dead quiet, no heat and sounds better than my reference Purifi. I stopped trying to justify Class A many years ago....

@yyzsantabarbara If Andrew can’t add speakons for you, have Ric swap out. Not more than $10...if you choose not to decide, you still have made a choice.

 

It probably is much better than stock......and you do incredible soldering and work.....looks better than my stuff.  Very professional.

@dolfan I do not know much about digital cables, but I do know when some companies do cables right. The 2 companies I trust are Audience and WyWires. I have not spent too much time trying other cables and have just stuck with these 2 because they work for me.

Saying all of this I just went to the WyWire web site and ordered the Silver cable. These cables are 40% off the price you see on the web site.

S/PDIF Digital Audio Cable Litespd – WyWires

I asked Alex to make me a BNC to RCA wire to eliminate an adapter. Hopefully, that was a good choice.