Destination Overload: Destination socket buffers can become full because of an application's inability to drain data from them in a timely fashion, potentially because of the server being overwhelmed.
Router for Audio Streaming
I have been streaming Pandora, Spotify and Qobuz through a wifi network streamer from a Netgear AC1750 R6400v2 router with no sound quality complaints.
Recently a router firmware update failed (a known issue with these) and as a result it is no longer accessible for administration. It still seems to perform ok and accepts new devices however the network settings are "frozen" and I am unable to view device IP addresses or traffic, neither via desktop browser nor via the Nighthawk app.
I will try a factory reset but have read that quite often this does not work in these situations, so I started investigating getting a new router to be able to pull the trigger quickly if needed.
I heard/read that routers can make a difference in sound quality, beyond just being able to keep up with streaming with no buffering. I'm wondering what router experience and recommendations folks have here for reliable audio streaming with superior sound quality at a reasonable price.
Thanks!
- ...
- 149 posts total
Well... good news and bad news. The bad news first: I won't be able to use yet any of the good advice collected here. I do appreciate all your inputs and will refer to them again when the time comes to replace the router. And to all the wifi skeptics (and believers): If any of you happen to pass through upstate SC and have an hour or two to spare, drop me a line here with some advance notice and we will welcome you to our home for a brief (or longer) audition. Cheers, Yoram |
Even the most basic home router you can buy can EASILY keep up with audio, as long as your provider/cable modem can also keep up. You do not need anything fancy. Even the most basic routers can do 100 Mbits/sec which is more than enough for even the highest sampled digital music, as long as you are not sharing the channel with a lot of other devices. Since you want to use wifi, there are 3 band choices: 2.4G, 5G and 6Gig. 2.4 has the most penetration and as a result the highest RSSI. 5G has better bandwidth but is prone to radar detection requirements, especially if you live any airport or military installation and hence you will be auto channel switching all the time anytime a radar pulse is detected (this is an FCC requirement). 6G is very new and is most likely prone to firmware errors so I would hold off on it. So probably your best bet is 2.4G band and if you make your streamer the ONLY device on that band, you are likely to get very good response.
|
@cakyol , thanks. I have been streaming audio over wifi for over 10 years, more than 3 with the current router. My streamer requires 2.4GHz. As I mentioned a few posts up I have around 10 devices on the same network and do not have issues. Sound quality is on par with, maybe better than my Sony ES CD player (most likely thanks to the DAC). Speedtest is showing regularly 300-350 Mbps download at my Mac over wifi. |
@yoramguy1 apologies I missed that and I thought you were looking to explore how you could improve SQ. if you’re streaming via Wi-Fi any, even basic routers will be fine. :) |
- 149 posts total