Need recommendations for a streamer


I would like to upgrade from a Bluesound Node to a higher quality streamer.

 

The Node sounds fine with my current system, but I am making a second system for my wife, and the Node is going to that new system. I thought I would take the opportunity to upgrade my streamer at this time.

 

My criteria are that it be a streamer only (no DAC/storage/CD player, etc), be able to hook into wi-fi/cloud without a physical wire/connection, have balanced outputs to go to my DAC, and cost less than 2,500 USD. Can anybody think of a streamer that fits this bill?

 

The rest of my system:

DAC: Terminator II

Preamp: Schiit Freya+

Amps: PS Audio M1200 x 2

Speakers: Thiel CS 2.3

 

Thanks.

cowhorn

@tahsin1022 +1 on Lumin U1 or U2 but they are not wireless as the OP asked for, I think the OP should reconsider and try to figure out a wired connection otherwise he is not going to be able to optimize for ultimate SQ.

I use a Lindemann Limetree Bridge.  It is excellent. Solid as a rock, very good sound quality. Outputs are Coax/ Toslink only. It drives a Denafrips Ares 2 then Tube Hybrid Vincent pre/ power amps. 

You lost me here: have balanced outputs to go to my DAC.

What do you mean by ’upgrade to higher quality’? Quality of what? As long as the signal is in the digital domain there is no upgrade in the sound. You plan to use a separate DAC, so all you need from the streamer is to have a good wifi connection and a nice user interface. The Bluesound is very good at that. Any Apple or Android tablet, or a silent laptop or fanless PC will do fine too.

Full disclosure - I’m co-owner and developer of the Network Acoustics Ethernet Filters.

I wanted to add to this thread the result of my experience over many years of trying to achieve the best sound from streaming based systems.

I’ve listened to the following Ethernet delivery methods, which have been mentioned in this thread, all using the same Auralic Aries Femto streamer.

1. Direct wired physical connection via RJ45 from upstream network switch

2. Inbuilt Wireless connection.

3. Ethernet over the mains power-line extenders to the Auralic RJ45 port.

4. Ethernet from a WiFi extender to the Auralic RJ45 port.

5. Media converters, RJ45 to Optical and then Optical back to RJ45 and into the Aries RJ45 port.

To my ears, the order of sound quality was 1., 2., then 3. and 4. were pretty much the same, and the 5. Option 1. is still the way to go if at all possible.

The thing that changes everything though, when using all these options other than built in wireless, is to try to remove the ‘noise’ that Ethernet is infected with.

Option 1. has less noise, whereas the extra devices used in options 3., 4. and 5. Introduce additional noise.

you can reduce noise in all options (except 2.) by having an Ethernet switch (with decent PSU) between the ‘extending device RJ45 output’ and your streamer. The noise can be further reduced by using passive Ethernet filters too.

I’ve found with the correct noise reduction measures in place, options 3. and 4. Can sound very very close to 1. and better than 2.

I’m afraid that I’ve never managed to get option 5. to sound good, but still working on that.

I hope that helps.