Beetle - I looked extensively at thermal dynamics as a source of 'aural congestion', drifting crosspoints, etc. That's where the new layouts came from, which have all the resistors separated from caps as well as positioned over ventilation holes in the board for natural convection, and moved either to the exterior of the cabinet or to separate XO enclosures. The hookup wire(s) also mount to pin-type heat exchangers close to each driver to drain voicecoil heat directly through the lead wires. Taken together the thermal management significantly improves dynamic range and 'sonic orderliness' during high-power use. The small-signal Thiel reputation got bigger.
My investigation began by remembering 'warranty claims' for melted caps and charred XO boards in the old days. In my power tests, some resistors got too hot to touch. Series coils also get hot - I put them on 3 rubber feet for all-round radiating and convection. My tool of choice is a non-contact infra-red thermometer to identify small scale/ local differentials. That led to some heat-sinks being added in-line on the XO board for dissipation before entering caps. I don't remember at what stage all that investigation stood when we hot-rodded your 2.4s. There's always more.