2. speakers
  3. 1403231229

Help 1960-era custom build

I'm wondering what I've got here. Rescued these from the curb on the evening before garbage day, thought they looked interesting.

A Wellcor 2-way enclosure tucked inside a custom pine cabinet, with bass driver in separate enclosure in cabinet. They weigh overall about 100# each. Woodwork is fair, nothing to get excited about.

They seem to work OK, I haven't pushed them at all, just hooked up to a little Pyle PTA2 amp to test. It struggles a bit to drive them. (It struggles, period. But it was nearly free, and it's light and handy.)

I haven't removed the grille from the mid/tweet enclosure, not sure how it's hooked on. I suspect screwed from the inside.

The tweeter is a University T-202 "Sphericon" driver with brilliance control. (Brilliance control mounted on side of cabinet, feels like a wire-wound rheostat when turned.)

The mid driver is a Stephens "Trusonic" 8 inch.

The bass driver in the ported lower enclosure is a Celesta "Utah", 12 inch, with a horn-like cone in the middle, around the solidly mounted post with the flat metal plate on the front. (See pics.)

Pictures

My questions are:
Are these worth anything as-is?
Are they worth anything individually?
Should I just give them away, or break them up for kindling?

Thanks for taking a look.
tenzip
tenzip OP
4 posts
 
Thanks for that information, Dekay. I'm going to take a careful look at those Stephens drivers, if they're consecutive or close serial numbers, looks like I could get upwards of $300 for them alone.

They sound good as-is, but like Czarivey said, selling them that way is another thing. These are the size (each) of a decent bedroom chest of drawers. Maybe not quite as deep, but definitely not something that will blend into a room.

Parting them out is probably the way to go.

Kindling for the cabinets, I think. They're old and dry enough they should light easily.
dekay's avatar
dekay
5,361 posts
 
Didn't gather that you have a pair of the mid's/high's.

Other than serial numbers on the 80FR's another thing is that they both have a Black circle around the "S".

There were two earlier versions of the 80FR with either Black or Red circles/dots (containing the "S").

Aside from measuring them with a multimeter in order to see how closely they are matched (typical 16 ohm versions measure in the 6-8 ohm range - long story as to why they don't measure close to 16 ohms) you should also weigh them as the different versions vary approx. 1.5 pounds from one another and the Red/Black dots are not completely definitive as to which version you have as there was some crossover/mixup per the various examples I've owned/measured/weighed.

Tentative savvy buyers would appreciate this info and it would foreseeably increase there value to such.

Anyway, nice save.

glenfihi
525 posts
 
Nice save from the scrap heap. Someone may really get a kick out of it. Your pictures show it to be in fair to good condition.
tenzip OP
4 posts
 
Dekay, did you see the pictures? (Link in first post.)

There is a black circle around the S, also a music note in the circle. Serial numbers are A13322, A13336. The A is printed on the label, the number is stamped.
dekay's avatar
dekay
5,361 posts
 
Yes, but I only noticed one set of drivers.

Sounds like an original pair as I've never seen consecutive serials numbers in old installations.

I live fairly close to where the Culver City, CA factory used to be so have run across quite a few of them over the years (including their larger coaxial drivers).

If you decide you want to try them look up "JE Labs open baffle" for an easy to construct (nice sounding) open cabinet design.

Think one of my Red circle 80FR's may have been tossed in error, but I still have 3 matched Black circle's (one's a spare).

My favorite vintage wide range drivers (Elac S517) were $5/pair (found in some way funky home-brew cabinets).
More to discover