Raising standmount speakers


My main system is in the media room and consists of Harbeth SHL5+ resting on stands that are 18 inches high (as recommended by Harbeth). When we were building the house this room was meant to be a proper media room. So we had the builder make a platform in the back 1/4th portion of the room to get the stadium seating effect. The platform is about 8 inches higher than the rest of the floor area. My listening chair (actually couch) is placed atop the platform. The problem is that in this listening position my ears are a little above the tweeter level.

I'm looking for suggestions on how to raise the speaker stands by 4-6 inches without breaking the bank or the aesthetics of the room. The room is fully carpeted by the way.

P.S. - please don't suggest removing the platform. We still plan to put a theater setup in there some day ... although, I'm running out of excuses to postpone the decision. I would much rather keep it as a dedicated 2-channel listening room, but the rest of the family is not too thrilled. The thought of just getting rid of the family has certainly crossed my mind though ...
128x128arafiq
Not sure what speaker stands you are using , but if they are sound anchors, call them and ask if you can order taller ones!
Brad
Post removed 
A bit of 'tilt' (shim ... fraction of an inch) to adjust the angle to proper height.
My guess would be that the eight inch rise would not have a great effect.
Does the speaker not sound right?
Seating at a poor acoustic position would make a difference regardless of the type of system ( 2.0, 2.1, 5.1).
The platform could be resonant though.
Post removed 
Tilt the fronts of the speakers up a tiny tad.

If the footers on your stands are adjustable just raise the front, or lower the back (footers).

DeKay