2. amps-preamps
  3. 137605-95931

Micromega M-100/150 field reports

Got a M-100 or M-150?  Share your setups, tweaks and observations, and help out your homies.

My initial M-100 config and some early observations in this thread.

Things I'm wondering about:

  • hacks & upgrades to LAN infrastructure including h/w, and whether they make an objective difference in reproduction from the M-100/150
  • power cords/supplies, with same question (objective difference?)
  • MARS room correction performance & value
  • whether Micromega will have any relief for the abject instability of their Android control app (circa 2016)
usery
aandras
1 posts
 
I have a M-150. Sound is lovely, really, but I too experience some anoying problems, especially with its networking implementation. I don’t like the IOS app, it has as several problems. So I tried to integrate the M into my LMS ecosytem, via UPnP. Unfortunately the M-One quite often "disappers" as UPnP device. In this case neither the app nor any other UPnP component can find it. Ping works. The only solution is to do a reboot on the device (or pull and replug the 230V).

Is anybody from you using the M-One as UPnP device without problems?

I tried to contact the manufacturer regarding this issue and Roon inegration but they’ve never answered. I have flashed the latest firmware and network driver (in fact, several times...).





usery OP
131 posts
 
"...anybody using the M-One as UPnP device without problems?"
After some early poor reliability, which a couple firmware reinstalls & reboots seemed to fix, my M-100 has been very reliable on the network as a UPnP renderer. I use the Micromega Android app to control volume and input sources only - other UPnP control point apps are much better, especially the BubbleUPnP android app (sadly not an option for iOS). On Mac OS I use upplay as control point app, also quite good if not rough in its ux implementation.

Direct-message me for a contact at Micromega en Boissy-Saint-Léger (he’ll connect you with a tech support person who can help).
roni44
16 posts
 
@usery, can you please PM me tech support for Micromega, I need help with failed LAN. Thanks in advance. 
thanks
3 posts
 

Hi guys 

I have bought few months ago m100 great amp and dac ! 
 

however I noticed that I don’t have tidal access on Micromega app, it’s not supported anymore ?thanks

 

 

thanks
3 posts
 

ok I got answer from Micromega  

 

"It turns out that these have totally changed the way to connect these streaming services with the app. This explains your inability to connect to the streaming service from the Micromega app.

We are not able to update the IOS app currently and advise you to go through your Tidal app in order to stream on your M100."

More to discover