Is my anti-skating too strong.

Pointless threads always the longest on audiogon.

Some people never heard about TEST RECORDS like Hi-Fi NEWS TEST LP, because there are special tracks for bias setting. But, check, it’s very simple.

Some decent cartridges designed to track well at 1 - 1.5g tracking force, in this situation, especially with advanced profiles, the anti-skating force is so little like 0.5 - 0.75 

Skating forces come from overhang. Period.    Wrong again MC, and a couple of other posts.  Skating forces can be inward or outward.

I think we are all agreed:
1.  There is no skating force, = side force, at a null point, and 
2.  There is an inward skating force when the stylus overhangs a null point.

So, guess what the force is when the stylus underhands a null point.
(ten marks).

I would suggest that everyone view these links. There are many posts in this thread that are not true. This will clear up many misunderstandings.

https://www.wallyanalog.com/post/skating-force-offset-angle-part-1-of-2

Also read about the basics of anti-skate

https://www.wallyanalog.com/post/skating-anti-skating-the-basics

Congrats on the music hall 9.3, great choice! I love my 7.3, was going to get the 9.3 but I did not like the overall look of cutout for motor, whereas on the 7.3 it looks better thought out. Of course yours is a step up from the 7.3 sound wise. As far as antiskate, disconnect fishing line from post when aligning cartridge. You only have three choices for antskate on that table. The most inner is the least amount, the outer is the most. Set stylus down on a record with lots of dead wax near label. Watch how the arm moves toward spindle, it should move slow and steady, not too quickly. When you see the slow and steady you are where you should be. Like I said, you only have 3 settings to choose from. 

Clear thinker, I do apologize for being so pedantic, but your point #1 is blatantly incorrect. In fact all of our pivoted tonearms mounted so the stylus overhangs the spindle WILL generate a skating force even at the two null points, because of headshell offset angle. I am not sure I understand your point #2, because the null point is defined by the exact spot where the stylus contacts the surface of the LP, so the stylus can never “overhang” a null point. Or perhaps you are being facetious, for which I cannot blame you.