Critical subwoofer tip

That response from MC was absolute nonsense. For someone who perpetually lectures on the need to simply listen and let ones ears be the judge on whether a difference in sound can be heard from making changes, I find it incredibly ironic that he would claim phase adjustment does nothing in any setup. Sorry MC but you’re wrong. Perhaps in a DBA setup like his the phase adjustment provides a negligible benefit. That point I won’t dispute because I’ve never personally utilized a DBA in my own room. However, when using a single sub the phase adjustment absolutely does make an audible difference at the listening position. I have a JL E110 with continuously variable phase control and it’s a helpful tool for getting the sub to perform at its best. One just needs to shut their mouth and listen to hear the truth. 

An appropriate topic for me!

I just added the Martin Logan 1600X to my Classic 9 eStats. This subwoofer has all the adjustments you can think of via phone and tablets remotely.

I read the manual front to back. ML suggests (when pairing with their electrostats) to (through remote app.) INVERT the signal, and then dial the phase control to 90 degrees. I set all parameters to ’0’ otherwise and crossed it over with the 3rd order filter at 35Hz. I am really impressed so far.

Today, I await for the ’Bass Kit’ software to arrive. This sub connects to the laptop via USB and runs Anthem Room Control software. I will be eager to see what it comes up with. From the features, it can sample up to TEN positions at your LISTENING AREA. ...and then, once that is set, you can adjust the settings to your liking after the fact. (to taste, lol)

Can’t wait. Oh, and for the nay sayers on subs in 2 channel systems, I like the lowest octave of the symphonic bass drum when tuned low in orchestral music, and being a pipeorgan tech for the same company for 32 years, l sure want to experience those frequencies below 25 Hz. Now, how many PASSIVE stand alone speakers can really reach 16 Hz?

Right, therefore, a subwoofer is a great way to ’augment’ your 2 channel system when done properly.

Why else would Parasound put a point one on their P6 2.1 preamp with a built in LPF via balanced line?

Have a productive one my friends, and enjoy the music (O:

The effect of phase adjustment (or delay if you will) is clearly measurable if you do frequency sweeps around the crossover point. Setting the correct phase is much more important with a single sub, and less important to not important at all as you add additional subs.

Here’s some REW measurements I did today showing how changing the phase on the subwoofers effects frequency response.
This isn’t about how good/bad the subs/mains/room are.
No changes for volume or crossovers on the subs, phase only.
Descriptions in the images should be self explanatory.
The first image are the speakers, and basically my best attempt to get the frequency as flat as possible without using and EQ or DSP. The results are a combination of crossover/loudness settings and room position.
I tried adding a third sub yesterday, and couldn’t improve on what I have with two subs. Mind you, it’s only an 8"/150 watt sub, compared to 15" and 900 watts.
https://imgur.com/a/YJeNzUh

Setting the correct phase is much more important with a single sub, and less important to not important at all as you add additional subs.

Does it also become less important the lower you set your sub's roll-off point?  For example, I have two subs set to roll off at a pretty low 40Hz because of the low frequency extension of my main speakers.