Re wire a Graham arm wand

Ahhh! I had one of those. Graham 2.2. There is someone who can re-wire. Graham. But it will almost certainly be cheaper and better to just by another one.

The early series Grahams (1.0 - 2.2) use a Bendix connector that Bob no longer can source. The connector has to be extracted with extreme care, if its damaged it will render your arm wand useless. To be safe i'd send it back to Bob.

To be safe i'd send it back to Bob.

Typically, I would recommend sending an item back to the manufacture, but based on my experience with Graham, if you want your arm back in less than a year , look elsewhere.  

Typically, I would recommend sending an item back to the manufacture, but based on my experience with Graham, if you want your arm back in less than a year , look elsewhere.

Sadly, this is an important consideration. Do politely reach out to Graham and hope for the best - he does pop up occasionally. But If I were OP I’d also start looking for another compatible wand on the used market. Were you looking for a wiring upgrade or fix of an issue? Sometime later wands are backwards-compatible and feature better wiring.

I bought my Phantom II Supreme in 2013 from an authorized retailer, but by the time I wanted an extra 10" wand about a year later, there were none to be had for a while. Then a couple years later on the III came out and I guess wands were available finally. I don’t know the current status. But I sourced my extra 2 wands on the used market with some patience.