How to connect an equalizer to an integrated amp.


I have a NAD M3 and I want o know whether I would be able to connect a Yamaha EQ70 to it. I have searched (briefly) but one thing that is not addressed is being able to do so if you have a subwoofer connected to the “pre out” and jumpers connecting “pre out 2” and “main in”. I’m new at this and pretty damn ignorant so any help would be much appreciated. I thank you in advance.
newbie1963
Not specific to your NAD:

Any equalizer gets inserted in any loop prior to amp, simply add 1 set of cables. Where?

Considerations.

Sub hookup:

a. remove the low bass job away from amp and mains. IOW, don't just add extra bass to small bass shy mains.

Preamp out, to adjustable crossover, to self-powered sub. only low bass to sub, remaining frequencies back to amp to speakers. That takes the demand for low bass out of the amp and out of the main speakers, allows lower powered amps, especially lower powered tube amps (significantly reducing amp price/size/heat/increasing placement options)
eliminates distorted low bass from mains

Equalizer:

After Sub?

Equalize after bass is stripped out, IOW, out of sub, to equalizer, to amp, thus adjusting only frequencies to mains, still able to adjust crossover at sub.

Everything prior to sub? Preamp to equalizer to sub,s crossover, low bass to sub, other frequencies to amp to speakers.

............................

Your NAD, preamp 1, preamp 2, built in crossover, bi-amp, zone 2, OMG

holy crap, read this 21 times, then ask them for help!!!

https://nadelectronics.com/wp-content/uploads/2017/02/M3ENG.pdf
You can connect the EQ to preout2 and main-in, subwoofer to preout1. The EQ will only effective to your main speakers, no effect to the subwoofer. If you want the EQ control subwoofer as well, a pair of ’Y’ connector will be needed.

https://encrypted-tbn0.gstatic.com/images?q=tbn%3AANd9GcSs3yzyzYMrWNF0fP65Q4_uRjhNGwPPS2hy3449L3lYAE...