2. misc-audio
  3. 154584-129691

Chemically Altered Audio

Is there any interest in a discussion about home-made formulae that can significantly enhance audio quality? After reading some recent threads here, it appears that one company which had been involved in this aspect of audio is no longer in business, and has no immediate plans to reopen. I would not be making this offer if that company was still operating. My recent experiments in this area are extensive, and most of it is unique. The experiments are not influenced by the products of any other company. I would like to share the results, if it's not too controversial, and if such a discussion would not cause difficulties for anyone actively involved in the business. I certainly don't want to hurt anyone by revealing and discussing what I know. On the contrary, I would like to help open minded readers get started on some very cost effective, radical home-made solutions. I can describe in detail the steps necessary to create some home-made formulae which have proved to be very successful in my own system. I'll await reaction before I continue.
whostolethebatmobile
asvjerry's avatar
asvjerry
4,336 posts
 
Just to ask the question:

Does the applied 'thickness' of the layers have any relation to the desired effect?

" The best formula consists of 2 parts. The first part contains the stronger chemicals. It is painted on first. The second part is the one I already put up on the forum, and it is painted over the top of Part 1 when it is dry."

I assume that explains the application 'steps', and the rationale for it....

PVA adhesive can be thinned, which ought to make application on a cable somewhat easier.  Perhaps a 'dip tray' could improve the coatings, rendering them more uniform.

Thoughts?
asvjerry's avatar
asvjerry
4,336 posts
 
...application onto a speaker cone Does strike my curiosity...
whostolethebatmobile OP
290 posts
 
asvjerry - the best way to apply the ingredients is in very thin layers. I have made sandpaper samples with up to a dozen layers, and they work better and better as you add layers. But my experiments show that certain ingredients work best when applied in a layer adjacent to certain others. For application to cables and chassis etc., more than 2 layers is not really practical, so I usually apply the semiconductors, conductors and superconductors (germanium, polyaniline, graphene) first. Safe, non-conducting materials are added last.

I use a brush. Thinning with water is good.
Dipping has not worked well for me.

I don’t really think the formula would work for speaker cones, but I haven’t tried it. I see no reason that it should work, apart from providing a measure of EMR protection for the entire speaker circuitry. There is also a spectacularly successful way to apply the material to any surface. It is called nanotape, and it really is incredible.
mahgister's avatar
mahgister
12,889 posts
 
I am curious about trying to improve cables but my most extraordinary improvement were gained with acoustical controls with my modified Schumann generators with stones and the electrical grid controls with the stones....The effect were not small....Cables are important but cannot be compared to the modification of the house electrical grid or the room acoustical field....Modification of the speakers were also a great improvement....I will try something with my "golden" plate and the graphene powder and mica....


I already have the nanotape for using with the graphene powder and will use it on some connector...
axeis1
278 posts
 
I’ll stick to Grapefruit Kush 🚀
More to discover