Essence®gZero10 Interconnect cables single ended


I received these IC's about 12 days ago and since then they have been cycling through the burn-in process - i.e. 24 x 7 streaming internet radio.

They already sounded as good as the gZero6 right from the start, but the blurb on the KLE Innovations web site implyed a significant improvement.

It took over 200 hours for them to "break out", but when they did - let's just say it was well worth the wait.

I've been fortunate to have tried the gZero3 on my system and I currently own the gZero6 and having now heard the gZero10's the one thing that stands out about the entire range is their consistency of tone - it just does not change.

So what has improved with the gZero10 ?...
- the dynamics are faster
>>> the gZero6 was excellent, but the gZero10 is significantly faster

- the very fine details have improved- especially the those extremely fine whispery details that contributes to the emotion of a vocal performance and also the mechanical artifacts as the performer depress instrument keys or move up and down the fret/finger board adding to the realism.

- the image is more spacious and accurate - instruments and artists are placed with laser precision but the space around them not only contains artifacts from their instruments, but also those adjacent instruments. It's a much more natural blend.

- the bass is significantly deeper, but extremely well controlled to the point where textures, even in the lowest frequencies can be heard.

But for me, the most convincing improvement is the reproduction of the venue acoustics present in recording of live performances.

One album I have is Julian Bream and John Williams Together. The venue acoustics have always muddied their position on the stage, but the gZero10's have cured that issue and then some - this is perhaps one of the best live recordings I have - now :-)

I have had the opportunity to audition the gZero3 on a friends very nice system and we both agreed they outperformed his far more expensive silver XLR interconnects from a well known brand, so the gZero10's should provide an even better sonic performance on systems capable of extremely high resolution.

If I had to sum up the key qualities of the gZero10 I would have to say they are fast, articulate, spacious, smooth and are able to convey the emotion of the performer and the space of the venue

These IC's are extremely good on my analogue rig, but on my DAC they bring the performance as close to analogue as I will probably get.

Either way, these IC's are excellent performers and will give more expensive cables a run for their money.

Yes, they are a little pricey, but they will probably be the last cables you buy.

Visit the KLE Innovations web site for more details and reviews

And if you do happen to buy a pair - be sure to give them 300 hours burn-in

Regards
williewonka
Maxima95 - I have tried the 3's, the 6 and the 10's. I currently own the 6's and have the 10's on loan.

The 6's are very good indeed. The 10's have a little deeper and wider image with more space around the instruments/voices. The bass is a little deeper,but just as well controlled without bloating. Their dynamic response is a little crisper and there is a little more clarity - in short, a little more realistic.

How much better the 10's can get depends on the components and other audio cables and powercables you have in your system

I have extremely good power cables and I also have the gZero6 speaker cables which made a huge difference to my systems ability to highlight the improvements the 10's can achieve.

Right now I am not conteplating the purchase of the 10's because I have the 6's + other upgrades to complete.

Perhaps if you could list your existing cables and components I could offer an opinion as to which IC might offer the best bang for the buck.

If Budget permits, what might be an alternate option is to opt for the 6's right now with a view to upgrading your speaker cables to the gZero6 SC's in the near future - having the gZero cables either side of my amp improved my systems performance considerably.

Hope this helps
Maxima95 - since Lateboomer has identified his components and mine are identified in my "system" link (see link at end of this post) I guess they act as a reasonable "benchmark".

So, if your components are of the same resolution capability as Lateboomers, then I might suggest you opt for the gZero10.

But, If your components are of a similar calibre as my own then I would probably recommend you opt for the gZero6

I still think you might want to consider either the gZero3 or the gZero6 speaker cables. The main difference between these two cables is the gZero6 extends the depth of the bass and exerts more control of the bass for more low frequency texture with faster dynamics and clarity across the board.

Will both IC's perform well in both systems? - you betchya! - but my view is - there's no point putting an F1 engine in a Hyundai.

Regards...
Lateboomer, what do you like/enjoy the most about the gZero10 ic and gZero6 sc...