VPI classic to ClearAudio maximum solution


I seek guidance regarding the upgrade path for my analogue setup. Presently  I have VPI Classic I (with SDS)/ JMW 10.5i / Dynavector xv-1s output to Coincident phono stage to Coincident  Line stage.

My present setup lacks on-the-fly VTA adjustability and I have decided to upgrade total setup. VPI offers a cost prohibitive VTA tower upgrade and most VPI experts (..dealers ) recommended not to go that route and upgrade total setup instead. I am tempted to do so. 

My present setup is sonically fine (...or so I believe as I don't have any reference to compare to). This is my first analogue setup which I have had for almost 6 years and I don't have any local means to compare to what is out there. Moreover Simple A/B is not practical and is inconclusive as there are just too many variables (phono/table/arm/cartridge/speakers/room/listening preference...) in an analogue system. My personal listening preference is to have a linear, dynamic, faster sounding, tonally correct (& not thin sounding) and musically engaging setup. 

I have an opportunity to purchase Clearaudio Maximum solution with Phantom II arm and Benz Micro Gullwing. I can imagine this is apples and oranges comparison given very different retail prices for these two setups. 

Financials aside, my question is… If I change to clearaudio setup what sonic differences I should expect compared to VPI Classic? Also, with clearaudio setup, between dynavector xv-1s vs benz micro, which should be more compatible /cartridge of choice or how these differ sonically in general ? I am not sure if there is a general house sound to VPI vs Clearaudio and Dyanvector vs Benz. 

Obviously, I am not looking for a definite answer as there are million variables, but any insight regarding these two choices would be helpful. Especially some fortunate long time members have gone through "been there done that" with several options and can sprinkle their knowledge in this thread. Thanks. 


celestial_audio
If you want to stick with VPI, then consider this
https://www.audiogon.com/listings/lis9fjb0-vpi-industries-classic-direct-turntables

I would offer 8- 9k, put your XV1 on it, and be done. Your Dynavector should perform better than it ever did on the Classic 1. I personally think it's too much cart based on MSRP alone.
Thank you every one. I finally pulled the trigger on VPI classic 2 (special edition with ceramic platter) and printed 3d 10" arm. Got the VTA tower as well. Now, I am wondering if I should upgrade discovery wire (which I suppose was better than Valhalla 2)  to Nordost reference.. Can someone explain the sonic characters of these two wires? 
Another thing.. I read somewhere that ceramic platter was $1200 option... is this cosmetic only? or does it have any sonic merit? Not much information online.. Thanks again.
You should head over to the VPI Forum for in depth info on all things VPI. Google will lead you to it.
The search function is a wonderful thing 
http://www.vpiforum.com/viewtopic.php?t=3635&start=0

The ceramic coating appears to be one of the questionable VPI "innovations"The same platter you previously used, just with the coating. 

I would play better records and get a US record cleaner unit before obsessing over tonearm wire options. 

Another thing would be the Phoenix(now Sota) speed controller. More accurate than the VPI unit. Consider  footers and decent isolation if you havent already.