2. amps-preamps
  3. 133765-108259

Power for Focal Aria 936

Hi all,
Just ordered a pair of Focal Aria 936s. Focal reports a sensitivity of 92dB, but a minimum impedance of 2.8 ohms is reported:
https://www.stereophile.com/content/focal-aria-936-loudspeaker-measurements

So how much power do I really need to optimize these speakers (large room)?
Current budget for power is only $1K, either integrated or pre + power. I'm certainly open to something 2-4 years old used.

Thanks for any suggestions/thoughts.
islet
atekelidis
12 posts
 
Naim Supernait
sjtm
92 posts
 

I have the predecessor to the 936 - The Focal Chorus 836V.  Similar impedance dip.  I currently drive these with a Marantz PM11S3 which doubles from 100@8ohm to 200@4ohm.  These sound amazing together.  I bought my amp used for $2,400.

Prior to the 11S3, I used a Marantz PM8005 with good results ( and can usually be found used for under $800).  I would not hesitate to look for the middle sibling in this range, the Marantz PM14S1 which you can usually find used for $1,200-$1,400.  Its predecessor, the PM15S2 (same specs as the 14S1) is often available for under $1,000.

gochurchgo
892 posts
 
Im running Chrous 807’s and yes, they are sensitive but also tough to drive. I ordered an Odyssey Khartago (stereo) to drive them. Khartagos are stable to 2 ohms and this was important to me as mine hit 4 ohms in the midbass frequencies. Despite a thread full of people telling me otherwise I KNOW this is why I struggle.

You definitely want something stable to 2ohms.
jafant
18,946 posts
 

Much Thanks! kosst_amojan

Happy Listening!

jafant
18,946 posts
 

islet


Bryston is a sonic match for Focal speakers.

Happy Listening!

More to discover