Infinity RS1 Servo problem

good to hear russ69. set at 70hz,wow that's pretty low.im set at about 150hz with the infinity mid/tweeter panels. that's all you have to go up to,to blend in with the m,logan panels. im surprised you went with the xlr model since you had to adapt to rca's anyway. whats nice though is you can set the overall volumn now between both panels. glad you are happy with the results. like you I dident think I lost anything the factory xover had to offer also. so if you get the infinity xover fixed would you be in a rush to go back??

Tomtab,

70Hz works for me but the woofers in the ML are still active not like your system where the EMIMs come in at 150Hz so the lower setting works in my system. The blend is very good. The DBX is part of the pro line so it has either 1/4 inch cables or XLRs, the XLRs work for my system, not so much for the 1/4 cables.
Sound quality wise yes I'm happy with the crossover vs the Infinity Servo. I don't think I've lost anything but I don't have any data to back that up. I don't think I'm going to repair the Infinity unit, I'm just going to put a note on it or give it to my nephew as a 3rd spare for his RS1Bs.

Thanx again.

Without the Infinity Servo crossover, the bass towers roll off at 12db/octave below 60Hz. This can be fixed with a digital shelf filter (or an analogue one), but using the DBX or Rane crossover without some equalization throws away the low bass. If you try to fix this with a bass level control, you'll have a peak between 60Hz and 150Hz.