2. cables
  3. 129678-87683

Power Cables and Power Conditioner

I bought my first PS Audio (PSA) outlet as well as a PSA power cable.  I had intended to use the power cable to go from the new wall outlet to the conditioner but when I got home I realized the Furman ELITE-15 DMi has a fixed power cable.  I thought dang it and was going to return the PSA cable but then decided to give it a try.  So I ran the PSA cable from the Furman to my Rogue Audio Preamp.  I swear I think there was a moderate improvement to the overall image.  But of course this could be placebo and I have not done a bunch of with/without listening but am happy so far.


I assume the Furman filter is doing its job and adding the PSA power cord to the Pre is preserving this current as best it can. I would like to add another cord for the DAC and the power amp. But thought I would float this probe to see what other people do in similar situations as this.
128x128jbuhl
oopwah's avatar
oopwah
20 posts
 
I have found that the "closer o the source" rule is quite relevant. I have used the PS Audio Premiere and Statement cables in the past and they go for vary reasonable prices now. I would recommend trying a Premiere on the source first, and if you like that try the same on the amp. These cables have silver wire in the mix and you will definitely notice the difference!! 
john_g
80 posts
 
I have a Furman power conditioner as well (Elite 15i), and was able to convert it so it could use a detachable power cord. It wasn't simple, but I could provide details if anyone's interested.
john_g
80 posts
 
A dedicated line with MRI outlets across the board with good power cables into each component is one way to ensure there is little to no noise spread from one component to any other.
What are "MRI outlets"? Does it make a difference to have them in at every point on the circuit, or just where the audio equipment is plugged in?
bultaco
61 posts
 
I assume your interested in better sound, hence the reason for buying an aftermarket outlet. I just replaced my Furman with an Audioquest Niagara 1000. BIG difference!!!  Now I know what they mean when the phrase "...It was like the window was wiped clean..."  is used.
alanholvey's avatar
alanholvey
96 posts
 
Yes, the Audioquest Niagara 1000 is incredible.  I am also using a second Niagara 100, plus 3 Audioquest power cords for my Martin/Logan SL-3 speakers.  What a difference they make.  The added response to the base reproduction is incredible.  Simply a must for any speaker system utilizing a seperate powered subwoofer system inside the speaker itself.  It's almost as adding a subwoofer system to my SL-3's.  Or to any additional sybwoofer system itself.  That is when one really can notice the added benefits of power cords and power conditioning.  It would be impossible to ignore in any type of a comparison setup situation.  One would know immediatly the differences.  
More to discover