Songs Faber Olympica III

Mtrot, don't you use a subwoofer for hometheater?

Well, I did use one for a bit, but I ended up moving it to my bedroom system.  I am thinking about getting one.

However, I'm just a sucker for big, full range speakers!  I like to run my front L/R speakers full range, even with a sub in use.  In a lot of action movies, there is prodigious deep bass in the front L/R channels that is independent of the LFE bass.  And, yes, sometimes it is directional, i.e., I can hear the roar/rumble on one side more than the other.  If you set the fronts to SMALL, then ALL the deep bass and LFE is sent to the sub.  I also have tower speakers for my surrounds, and I also have them set to LARGE, so I get deep bass coming from behind me as well.

The other reason I like/want speakers that go deep is for two channel music.  I like speakers that can more fully produce the bass that is in the recording without having to send it to a sub.  When I do use a sub, I like for it to just augment the deepest bass a bit, and not try to reproduce the bass that is higher and should be coming out of the L/R speakers.  Yeah, I know I'm in the minority in my thinking. 

Just noticed that auto-correct changed "Sonus" in the title of this thread to "Songs."  Sorry about that!

Question: I am going to try bi-wiring these speakers.  I have a Macintosh 2275 integrated amp, which has 4ohm, 6ohm, an 8ohm taps.  Currently, the speakers are attached to the 4ohm tap running into the high inputs (using the bridge that came installed on the speakers).

For bi-wiring, which taps should I use? 8Ohm taps connected to the high inputs on both speakers and 4Ohm taps connected to the low inputs on both speakers? Or vice versa?

That’s what I would do... 4 ohm to the low/bass connectors and 8 ohm to the mid/hi. I believe the III’s dip down to near 2.6 ohm at 103 hz. So from what I gather,they are more of a nominal 3 ohm load. More current into lows connected that way. Of course,nothing is written in stone...

Also... When I was using a single run of cable to the III's I connected the cables to the low connectors and jumped to the mid/highs. This way seemed to let the speakers give a much more musical presentation overall.  The other way around thinned the sound out a bit,at least with my system. ymmv

Thanks! 

Bi-wired them this evening: sound quality jumps out as *noticeably* better in back to back A/B comparison.  Will need some time listening to them as bi-wired to be able to describe/quantify the improvements. 

Question: what would happen if I connected the low/bass input to the 2ohm taps rather than the 4ohm, and then either left the high input connected to the 8ohm or moved it down to the 4ohm?

By "what would happen," I mean both "what would one expect to hear" and "am I going to blow something up if I do this"?