High Fidelity Cables CT-1designed by Rick Schultz


In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
I have an Essence power amp and preamp that use a power cord with a custom round military connector, so I cannot use an HFC power cord with these.  They use a power cord with electronics and are called power bridges, which I plug into my HFC URH power conditioner.
Next, is there a reason why you do not plug your amp into the Hemisphere, other then the Hemisphere is plugged into the P10. I would understand not wanting to plug the amp into the P10. 
If so, when you do try the Hemisphere by its self, try plugging the amp into the Hemisphere.
Again, I would be surprised if you do not hear an improvement in sound quality. 
I believe Hemisphere has a 10A max so might not work some amps.

If you're pulling 10 amps with an amp, that would be some major kilowatts happening!! With 250 watt monoblocks and my full system in play including all peripherals, I only measure around 3 amps total pull at 85 db levels. I'd like to experience a system pulling 10 amps - call me for a demo!! :)
bugredmachine 

If you're pulling 10 amps with an amp, that would be some major kilowatts happening!! With 250 watt monoblocks and my full system in play including all peripherals, I only measure around 3 amps total pull at 85 db levels. I'd like to experience a system pulling 10 amps - call me for a demo!! :)

Not all watts are created equal, class A or AB, design ... You have to find someone armed with an engineering degree for more details.

According to the owner's manual, each one of my tube mono can draw up to 10A.   My Hegel H30 uses a 15A fuse.   Can't even power up with a CT-1 PC.  If powers up, play ~20 seconds, shuts down and CT-1 connectors get very very hot.   So we can safely assume it's drawing more than 5A or 6A.

I don't want to damage my components or burn house down so if you want a demo, buy a new amp.  :-)