Serious Power Problems with my HPA2


Hello all
I bought a proceed hpa-2 and im having some power issues that i nor anyone else ive ask can answer. The Proceed amp goes thru several checks when you turn main power on and if it does not like what it sees it goes into protection and wont let you turn on standby power. With the amp plugged into just the wall no inputs or spk cables connected (but yes i have tried it with those connected) the amp at my house goes into protection. my volt meter says i have a fairly steady 121.9 to 122.5 vac. if i leave the amp on the floor and run an extension cord to my neighbors house the amp powers on fine every time. I checked his voltage and its in the same range as mine. I have turned off every circuit breaker in my home and ONLY connected the amp and still have the same problem (its a 20 amp circuit) ive called the power company to come out and check the power (they say its fine) and called an electrician to come check house wiring (he says its fine). What am i missing? is there any power device that would solve this problem that can handle the current draw of an hpa-2? Does anyone know anything about the problem im having or can you offer any ideas as to why this is happening?
Please help as im out of ideas
Thanks
Lee
LRoss@CNGMail.com
lross
Sounds like the problem is in your amp. I would be curious to know what the voltage is at the end of the long extension cord when plugged into your neighbors house? Have you tried physically bringing the amp to your neighbors house and plugging the amp directly into one of his outlets? I bet you will experience the same problem. Maybe the protection circuit is overly sensitive and when you use a long extension cord you are dropping a few volts in the extension cord which allows your amp to turn on, Bringing the amp to your nieghbors house will prove or disprove this. In any case is sounds as if the amp may need service.
Good idea Gmkowal , but Since it is so heavy, you might also try to use the extension cord on your outlet. Do you have another power cord you can try? Maybe there is a problem there and it was just turned the right way when plugged into the neighbors house? Although you would think that would trip your house breaker. My lights dim a little bit when I power mine on but haven't had any problems except staying up too late to listen. Let us know what you find out.
thanks for your reply although i didnt carry the amp to the neighbors house i did try to run it thru the extension cord at my house and i tried several different power cords with the same results. my concern is that i box this thing up and send it to proceed and it works great there so they send it back to me still broken. still seems strange that it works on the neighbors power.
Lee