Help with Turntable/arm/cart decision


Hello Audiogoners please help me with a NEW turntable purchase. System is McIntosh C2200 pre with MC352 amp. Speakers are Dynaudio Contour 3.0's. OK, looking for a complete new turntable with tonearm and a cartridge for under $5,000. So far I am looking at: Clearaudio Performance DC w/verify tonearm, Pro-Ject Xtension 10 w/10cc EVO arm. I would like to be able to use my MM phono input through the C2200, I would consider an external phono pre if needed. I really like MC carts over MM's not sure why.....maybe mc seems to me to be more accurate and dynamic?? Or maybe I haven't heard a great MM. Tables I have had in the past are....Thornes TD160 w/TP16 tonearm with Grado Prestige woodbody, I think. Also, Rega P3 w/RB301 tonearm and a Dynavector 10X5. Help, I want something up a level or 2 from these, if possible?
128x128mattmiller
TTW Audio is coming out with a new table soon for around $3500. I have one of his tables they are built like a truck and sound great
The thing is the OP isn't spending that much on his table/cart set up. I'm sure the TTW table will be good. Most in that range are pretty good. The nice thing is that we have many new options at all price ranges. Thanks for sharing about the TTW table. Look forward to checking it out when it happens.
The C2200's phono stage provides 40dB of gain. The phono sensitivity is given as 4.4mV for 2.5V output at 1kHz.

The DV 10X5 would be a perfect match (Output Voltage 2.5mV at 1KHz, 5cm/sec.) for the C2200 phono stage as it should sound very neutral. The DV 20X2 ( 2.8mV at 1KHz, 5cm/sec.) should also work very well and is a much better cart than the 10X5.

You could go with either the Clearaudio Performance DC w/verify tonearm or the Pro-Ject Xtension 10 w/10cc EVO arm, both excellent TTs. That said, DV carts pair very well with VPI turntables.

VPI Prime ($3,500.00) and the DV20X2 ($900.00) would fit your budget.

No bias here as I don't own VPI nor DV.
Thanks everyone for the posts...I will follow up after I get the turntable setup on my system. It my not be until the 10th of july or so...

Matt M
So the Turntable (Project Xtension 10) arrived 3 days ago, and from the moment I placed the needle down on the record I realized that this was a couple levels up from what I was used to. First the sound is flying out of my speakers like never before! Also, there is more everything. This table Rocks on Led Zeppelin Song remains the same album, the song "No Quarter" Has immense weight and force, Jimmy Pages guitar is like a well sharpened knife slicing away while Plants voice is rich, full, powerful and detailed. I have been spinning everything from 80's pop to 50's jazz and One thing I was really aware of was the way it presented the event very forcefully with great tone and weight, ultra detail, dead solid speed control, over my REGA P3/24 w/Dynavector 10X5 (very good combo). I'm still going thru break in and so far I am blown away with the beautiful dynamic and detailed sound from the Clear Audio Maestro Ebony v2. This MM (if the midrange ever opens up) is one of the best cartridges I've heard MC or MM. I still love Low output MC's don't get me wrong. more to come later. Ill post pics in my system soon. This thing is GORGEOUS in piano black laquer finish too.