Zyx mistracking issue


Hi all!
I experiment some mistracking issues with a Zyx R100H that I acquired on e-bay in 2012. My tech confirms that the tip is not worned out (I listen no more than 2-3 hours/week on average). My Zyx is mounted on a LP12 with a Zeta arm.

Has anyone experienced tracking issues with Zyx cartridges? All reviews I found stated a flawless tracking performance. Could it be some compatibility issue with the Zeta? Is the suspension particularly fragile? As a comparison my backup table is a Thorens TD160, grace 707 arm and grace F9e cartridge; this backup setup does not have mistracking issues despite its older age.

Thanks for any clue.
vepiteski


vepiteski

Showing 4 responses by lewm

This is the first I have read anywhere of a problem endemic to ZYX cartridges in particular, although the internet audio sites are replete with complaints about just about any brand of cartridge you care to cite. I have been happy with my UNIverse, is all I can say. For sure, the fact that the OP had a problem 7-8 years after purchasing a used ZYX that was far from the top of their line to begin with means nothing. 
The thread is two years old, so unless the OP is not using vinyl since he started the thread, one must assume he has either moved on or solved his problem.  But he is describing the performance of a cartridge he bought used in 2012.  Which means it is more than 9 years old as of now, and neither he nor we know how it might have been treated before he purchased it. One cannot seriously diagnose and treat a problem like this on the internet.
vepiteski,  My apologies.  Apparently the VTF you've chosen is within the recommended range of the manufacturer.  Many times people try to cure a bit of mistracking (if that is your problem) by increasing VTF beyond the recommended range.  That's what I was warning against.
2.2g is well above the recommended range, is it not? That’s usually not a good way to combat perceived mistracking. What’s the effective mass of the zeta?