What is the reason for my speakers having an audible buzz?

Thanks guys. I seem to have gotten it fixed. I unscrewed the sleeves on the MIT cables and exposed the 2 individual soldered wires. Wish I had something exciting here, but there was nothing visibly wrong. So I simply cleaned all parts with isopropyl alcohol, made sure there was no loose or broken solder. and made sure the plastic separator washers were good. Now my speakers are the quietist they have ever been. Guess I got very lucky. Thanks millercarbon and GS5556!

Ok, thanks GS5556. I will try that.  Also, another thing came to me and I can't think it through. All my components are plugged into one electrical outlet except for the power amp. It is plugged into an outlet on the other wall. Both outlets are isolated from the rest of the house electrical system, each going to their own circuit breaker.  But now what I'm wondering is : the components are all grounded via the common house elec. ground because they are all 3-prong plugs. But the Old Dynaco amp has only the 2-prong plug, making it not grounded. Has anyone had similar circumstances and know how to safely ground an old vintage amp?     James

Most likely it’s the insulation washers around the rca connectors. If the rca connector comes in contact with the chassis you get a buzz. When you touch the barrel of the cable you are reseating the washer and the buzz goes away. Double check by trying a cheap rca cable and see if the same thing happens. If not, it could be the MIT cable.

Thank you for responding. I'll try your advice.

Ground issue. You're gonna need to do a little trial and error tracking it down. It could be the interconnect. Or it could be the RCA connection itself, or somewhere inside the amp. It could even be things plugged into different outlets. Or maybe even something else.

Clean the RCAs real good. Both ends, male and female. Probably not this but since nobody ever cleans anything you need to do it anyway so start with this.