What effect does cartridge loading have on sound?


I just bought a grown up turntable (VPI HW19 w/ Souther Linear tracking arm)to replace my trusty old Dual 616Q. It came with a cartridge labelled "Souther," which the seller believed to be a moving coil unit made by Benz. The thing is I am running it through the phono section of my 20 year old Harman Kardon receiver, which has no provision for changing resistive loading or capacitance, and says it is for MM only. Oddly enough, the system sounds pretty good. What I'm wondering is what effect changing the loading has on the sound. I thought MCs were supposed to have loading at around 200 ohm, and MM 45K ohm.
honest1

Showing 1 response by markd51

Hi, I honestly have no knowledge about this "Souther" Cartridge you have, and as nsgarch explains, it's probably unlikely that it is a high output MC Cartridge. (Due to the fact that you seem to have sufficient gain, and you don't mention that you have to crank the reciever's volume control really high to get acceptable volume levels)

Most MM Phono stages in older recievers generally accepted-were compatible a MM Cartridge with output between 3.5Mv-5Mv.

Even let's say if you were running a high output Benz Micro Glider (Like I myself have) with an output of 1.8Mv, I think you would find insufficient volume, and a drastic mismatch of volume levels versus other outputs (ie: FM, Aux, etc) on your reciever.

There may be the possibility of finding a model number of this Cartridge by unscrewing it from the headshell, and looking in between, on the Cartridge's topside?
Once you could possibly find this out, more information would be likely to be known about it.

Hope this helps, enjoy! Mark