WA-Quantum GmbH's Quantum Chips

Ozzy,

I am using the fuse chips, one actually since I only have one piece of equipment with a fuse. John Pharo at The Cable Company recommended it to me.

The fuse chip takes about 1-1.5 hours to settle in and show you it's stuff. The soundstage will widen, especially at the rear of the soundstage. The individual performers become something much better than before, I don't know exactly how to describe it though.

That's what it did in my system anyway.

Chuck

I don't know how many of you saw this small review: http://www.positive-feedback.com/Issue63/furutech.htm

Myles brought up this point that I found very true in my own system: the WA-Quantum Fuse Chip makes it obvious which way the fuse should be in one's component.

Before I applied the chips to the Furutech, HiFi-Tuning Supreme and Synergistic Research SR20 fuses, the differences in the directionality of the three fuses were very subtle to my ears.

After I placed the chips on them, the difference was obvious: in one direction the sound is full and rich in the mid and lower region and in the other direction the sound is thinner and highlights the upper region.

I could always hear the difference when I had the Isoclean fuse, but I didn't notice a difference in these three fuses that really mattered too much.

Chuck

For Pete's sake, don't cut the chip! The secret of the chip came to me in a dream last night.

Under the 'W' is a micro-communication device. WA-Quantum has found a backdoor in and the chip is constantly calling and receiving this free of charge: http://machinadynamica.com/machina60.htm

Chuck

Gbmcleod,

I hold the fuse chips in place with just enough cellophane tape to wrap around the fuse once.

Chuck