VTL MB-450 - Does isolation improve performance?

Before you spend $700 on a BDR why don't you try some HAL-O tube dampers first. They are cheap and might surprise you.

I posted this in the Misc fourm. Give it a try you wont be sorry i wasnt!!!I just recently purchased eight of these isolation feet to go on your own isolation base. I have Manley tube mono blocks, which I recently bought, and for obvious reasons, they would not fit in the stereo stand. I was looking at mono block amp stands and was surprised by the various price amp stands ranged. I've tried a few amp stands out, the cheaper ones, Target as an example, and some of the higher priced ones. After researching and trial and error, I came across these Isofeet. I was informed how to make the base, which cost around $40 at Home Depot for both types of wood, and then bought the Isofeet to attach to them. I am not one for doing reviews, or plugging any product for that matter, but I must say, these things with the bass are awesome. These isofeet are the best isolation device that I've tried. And the beauty of it, is I made them myself (except the feet)!. The base only took me 15 minutes to make. When I first received the Isofeet, I was extremely surprised by their simplicity, and kind of wonder what I had just purchased. But after applying them with the base I made, I must say these are the best amp stands that I have ever had or listened to. I can crank my system where you feel the bass in your chest and walk over to the amp's, which I have many times, and touch them and feel nothing. I've tried this with the other stands that I've had and always felt some vibration on the equipment. These stands I built have no vibration at all when these were incorporated in the system. Point being, it's amazing how you can spend thousands of dollars on a product and then spend less than $200 and it equals if not betters the thousand per dollar product. Price to performance ratio. If you ever have an opportunity to try these Isofeet I don't believe you'll be disappointed. They may look simplistic, but they sound great. I didn't believe it until I tried them.

Thanks for the good suggestions.

My experience has been that, particularly with tubed equipment, isolation does make a difference in performance, not earthshaking (unless the earth in your listening room is shaking!), but noticeable in terms of better image focus and detail retrieval. In my case, I have had better results using devices that try to isolate the tubed amp from its environment (KWorks IsobaseKs and the IsoFeet Btstrg refers to) rather than tip-toes, cones, spikes or points which channel energy away from, but also to some extent back to, the amp. Racks and platforms, such as the Symposium shelves, Seismic Sinks and the amp stands Btstrg made, are effective as well if they can both drain away/damp the vibrations from the amp itself and isolate the amps from the vibrations coming up from the surface on which they sit. All of these items, and the items mentioned by others above, will affect the sound you hear to some extent; whether you like the changes effected, and how much you want to spend to get that last bit of performance, is your call.