I have an Audiodesk and sounds like a good idea to use the VPI to give a final rinse. Also have zerostat, Mapleshade zerostat and Furutek d'stat. I will post after I try
VPI versus Ultrasonic cleaners
There have been rave reviews concerning ultrasonic record cleaners of all types. But no ones has ever put the records under a microscope. I am posting this because I have at 130x.
I purchased 2 of the same records, 1 ultrasonic cleaned and 1 not. I examined them and the ultrasonic cleaned record while cleaner was not fully clean. I contacted the seller and this was one of the drip dry cleaners.
I gave the ultrasonically record the following light cleaning (which did help it)
1 Docs miracle record misto sprayed and spread with a cotton makeup remover
2 Steam with distilled water
3 Vacuum with my VPI with a Delron tube (much better than the cheap clear one)
4 VPI record cleaner misto sprayed and spread with VPI brush
5 Steam with distilled water
6 Vacuum with my VPI
7 Steam with distilled water
The other record received the above process but repeating steps 1-3 and 6-7. So twice the cleaning
I re-examined them under 130x and showed the results to a couple others who agreed that while clean the double VPI processes looked better.
Listening wise they sounded the same. Listening was done on a SME20/3 with a Sumiko Palos presentation cartridge. Any difference should have been picked up.
Shame I can't quickly post the pictures. But in short if you have a good VPI process perhaps invest in a USB microscope and look at the record before buying another cleaner. If you do get an ultrasonic cleaner I think it needs to be the drying kind.
I purchased 2 of the same records, 1 ultrasonic cleaned and 1 not. I examined them and the ultrasonic cleaned record while cleaner was not fully clean. I contacted the seller and this was one of the drip dry cleaners.
I gave the ultrasonically record the following light cleaning (which did help it)
1 Docs miracle record misto sprayed and spread with a cotton makeup remover
2 Steam with distilled water
3 Vacuum with my VPI with a Delron tube (much better than the cheap clear one)
4 VPI record cleaner misto sprayed and spread with VPI brush
5 Steam with distilled water
6 Vacuum with my VPI
7 Steam with distilled water
The other record received the above process but repeating steps 1-3 and 6-7. So twice the cleaning
I re-examined them under 130x and showed the results to a couple others who agreed that while clean the double VPI processes looked better.
Listening wise they sounded the same. Listening was done on a SME20/3 with a Sumiko Palos presentation cartridge. Any difference should have been picked up.
Shame I can't quickly post the pictures. But in short if you have a good VPI process perhaps invest in a USB microscope and look at the record before buying another cleaner. If you do get an ultrasonic cleaner I think it needs to be the drying kind.