Look for the original Target Wall Mount.
NOT the current version. Unfortunately, you might have to be patient. I bought mine for $80 in the past few years. Replaced the MDF shelf with a much better constrained layer DIY design costing about $100 (if you wanted to do it on the cheap you could do a pretty good CL design for $30).
Mounted properly into the studs, there is no turntable this would not support, unless the table weighed more than 200 lbs.
http://www.progressive-engineering.com/klipsch/target_wall_stand.jpg
NOT the current version. Unfortunately, you might have to be patient. I bought mine for $80 in the past few years. Replaced the MDF shelf with a much better constrained layer DIY design costing about $100 (if you wanted to do it on the cheap you could do a pretty good CL design for $30).
Mounted properly into the studs, there is no turntable this would not support, unless the table weighed more than 200 lbs.
http://www.progressive-engineering.com/klipsch/target_wall_stand.jpg