2. analog
  3. 193233-96382

Vintage Japanese DD Consult and Suggestions Please

A little over five years ago, I worked with Chris Harban at Woodsong Audio to craft a bespoke Garrard 301 for me and my my vinyl collection. I had previously had a Dual of some model followed by a Thorens TD 160 with a nice Ortofon Black MM cart. The 301 was completely restored featuring a heavy mahogany plinth, Ortofon AS 309S tonearm, and Ortofon SPU head. I have completely blown away with how this table has sounded and looked. The sound was huge, rich, and detailed...everything that I heard that idle drives from this era should sound.

Unfortunately, some family health matters have forced me to liquidate some much revered audio gear, and recently placed my Garrard 301 up for sale. I do not wish to be without a way to continue to enjoy my collection and would somehow like to come as close to the performance of the 301 for around $2500 or so. 

My considerations (thus far)for this change are as follows,

Denon DP80

Technics SP10 Mk 2 or 3

Technics SL 1000 Mk 2

Luxman PD 444

As you can see, I am curious about the more vintage looks and sound of the direct drives coming out of Japan, and am hoping to glean from this audience which of these units may provide me with the same (or as close to)level of enjoyment that my 301 has done. Thoughts on tonearm and MC cartridges pairings with each would be helpful.

I am not really considering anything belt driven at this time for whatever reason, or a deck that veers away from a traditional turntable aesthetic.

If it helps, the rest of the signal chain is as follows.

Aric Audio Motherlode preamp

Manley Steelhead phono pre

Aric Audio Transcend EL 34 push/pull amp

Klipsch Forte iv speakers.

 

I am grateful in advance for your thoughts on this matter.

 

 

laaudionut

Showing 1 response by nwres

nwres's avatar
nwres
271 posts
 

+1 for the Yamaha GT 2000 (L, X). HIFIDO in Japan has them available now and then. And they go through all of the electronics, motor, bearings to assure it is in top form, then double box with injection foam. I have A/B'd with a very well regarded JVC QL-A75 from that same highest Japanese R and D era and the GT is more transparent with finer micro/macro detail. Most all are Japan 100V. But the GT2000 has a DC port on the back to accept 24V dc. I had a power supply built to feed the 24V to avoid the internal power, but a simple step down works fine. It is not going to fit on every stand, and it weighs 61.73 pounds.

As Raul stated, the modern Technics are hard to beat. The SL-1300G is a very fine machine and it should fit the ascetics, but you will be hard pressed to find one for less than $3200. And based on the specs, I would be surprised if it could beat the GT2000.

More to discover