Vintage Denon Direct Drive Turntable


I have been interested in experimenting with a direct drive TT for some time just to see what all the fuss is about. I would be comparing it to my belt drive TERES.

Does anyone have any experience with a Denon DK 2300 TT with the DP 80 Servo controlled direct drive motor? These came out in the '80s, I believe. The base allowed for two arms as well.

Is this TT worth the time and effort?
128x128zargon
Dear T bone: It happen that I own a DP-80 and DP-75 that seats in a 70-80lbs plinth of green marble and white onyx, beautiful stones.

Yes, like the granite mable/onyx " ring like a bell " if you " exited "/hit it but with a normal TT playing there is no problem.

Regards and enjoy the music,
Raul.
Forgot to reiterate that I think it is a good idea to dampen the resonance of that cosmetic ring that surrounds the platter on all Denon dd tables. If you're going to the trouble and expense of making a slate plinth, it behooves you not to overlook this detail. As I think I wrote way back at the beginning of this thread, I inverted my DP80 chassis (sans platter) on some blocks of wood for support, so as not to put weight on the spindle, and I filled the ring with some melted beeswax (or whatever was used as potting material in a KLH9 electrostatic speaker power supply). This worked very well; with the hardened beeswax filling, the ring does not "ring" any longer.
Lewn. I forgot to mention that I have filled the ring or skirt with isodamp compound (blacktac) as used in speaker cabinets, this is actually in contact with the plinth, and has given a deadening effect and added mass (not that I needed any more).

The dp80 is really singing now, I have stunning presence and intimacy to vocals. I cleaned it up earlier with WD40, that brought the natural grain up very nicely, and finshed with bees wax that gave it a nice shine.
Here are some more pics.

http://i230.photobucket.com/albums/ee15/indypepa/dp6.jpg
http://i230.photobucket.com/albums/ee15/indypepa/dp8.jpg
http://i230.photobucket.com/albums/ee15/indypepa/dp5.jpg
damn fine lookin' table ya got there treehugga.

Question for the people who fill the ring... What does that do to the ability to fix your electronics/wiring should it go...?
T_bone, I made sure that the beeswax stopped flowing just short of the part of the ring that houses the controls. It solidifies rather rapidly as you pour it, due the fact that it is cooling at the same time, so there was no problem controlling its dispersion. No wax in the electronics. I am sure Treehugga was able to do the same, since his damping compound probably was never very liquid.

Treehugga, That's loverly. You might try a different tonearm some time, just for kicks.