VAS (Steven Leung) cartridge repair/retipping service?

Don't do it. Never allow a 3rd party re-tipper to touch any cartridge lest you become the laughing stock of your peers here and on all forums where these grand poobahs of phono cartridge wisdom reside.

Those proclaiming 100% positive experiences with re-tippers are nothing but shills and never buy anything new anyways, this hobby can do without them.

If you think your newly re-tipped cartridge will sound better than new then you are sorely mistaken. skilled practitioners employing modern methods, materials and potentially better styli profiles never advanced the art and whose efforts will never be accepted as an "improvement."

Phono cartridge design is a PRECISE science with protocols fierily adhered to. Such information re exact specifications of processes and materials are cloaked in extreme secrecy and guarded with the same doggedness as the recipe for Coca-Cola and WD-40 but to name but a few.

Yes, a 3rd party re-tipper should NEVER be considered other than by those who can care less about vinyl replay and music in general. Don't be a douchebag by pretending you got a deal or 'saved money' because you didn't.

WHEW! now that I got that off my chest I feel SOOO much better. Steve at VAS has done an awesome job for me repairing a half dozen high-end carts and counting. everything from a re-tip to cantilever/styli replacement, re-tensioning suspensions and fixing dead shorts. He's a miracle worker and my go-to guy. I heartedly recommend his services!

Steve at VAS has done an awesome job for me repairing a half dozen high-end carts and counting. everything from a re-tip to cantilever/styli replacement, re-tensioning suspensions and fixing dead shorts.

Wow, that’s amazing, you don’t want to deal with original cartridge manufacturers/designers for a proper rebuild, you have someome else, right?

I assume you like new cartridges but you don’t want to buy a new cartridges from the dealers even if nearly all manufacturers simply change worn cartridge for a brand new one via their dealer (instead of re-tip/rebuild) for a special price. Because you have someone else who can fix broken cartridges cheaper with different materials it’s OK for you.

One question:
why all your cartridges required re-tip, cantilever/stylus replacement, re-tensionin? Are we talking about quality high-end cartridges here or something else? Do you use them so hard? @saburo

this thread has been very helpful. how close to "new" or "original" can a rebuild get? have some of you found your carts to sound better than original versions? thank you.

@c_cocobean Do you know any cartridge designer who will post on audiogon? Below is audiogon post from Jonathan Carr who is internationally renowned cartridge designer (maybe you know Lyra cartridges?). In my opinion his thoughts about cartridge re-tipping process is much more valuable than all the post in this thread. Do yourself a favor (read his post on audiogon from 2013 below):

*** "Changing only the stylus will alter the sound less than if the cantilever material is changed. When a cartridge is designed, the designer will consider the moving mass (sum of the stylus, cantilever and coils), the resonant character of the cantilever, and the (sonic) propagation velocity of the cantilever (affected by the cantilever’s mass and rigidity), then choose the suspension and dampers accordingly. If you change the cantilever material, you are effectively throwing the original designer’s calculations away. There is much more (far more than what I have written above) to rebuilding a cartridge than affixing a new stylus or altering the cantilever. In over 30 years of involvement in the phono cartridge industry, I have not seen one retipper who has presented the entire story, who has effectively said "Here are the all of the considerations. Here are the cons as well as the pros. Make a wise choice that is best for you" ... " (J.Carr, 2013) ***

I'm waiting on my ZYX Bloom 3 to get a boron/micro-ridge mounted by Steve at VAS. I Will let you all know how I like it when it's done.

I am a convert to having a Cartridge Treated by a Third Party Service.
This has come about through personal experiences as well as having a interest and attempting to learn a little about MC Designs and reasons why certain materials are adopted into the designs.

I have also been able to compare my owned Third Party Treated Cartridge to the Original Model, 'from a Listening Point of view only',
the Third Party Service Treated Cartridge was delivering at a noticeably different and improved level when compared to the Original Model.
The good thing for the Comparisons undertaken, is that both Cartridges were mounted on the same Head Shell Model and used on the same Tone Arm and TT and Support System.
This will allow for identical environmental influences on the Replays.

There are differences to be considered as follows:
1, The Third Party Treated Cartridge had about 100ish ( Quite Accurate) Hours of usage and was with a Short Period of time exposed to the Ambient Environment,

2, The Original Model was said to have about 300+ (Not Entirely Proven) Hours of usage, as well as having been exposed to the
Ambient Environment for a much longer period of time.

3, IMO, the longer a Cartridge is left exposed to the Ambient Environment the more it is becoming contaminated with a unwanted collection of Particulate on the working parts,  and it seems there will be a time when these contaminants can be a impedance to the overall performance of the Cartridge.
(I have no real proof of this)

What is known is that both owners were sure in their formed views the Third Party Treated Cartridge was with a very desirable SQ and was a improvement over the Original being compared against.

My Purchase of a Donor MC and the Third Party Treatment was at a lesser cost that purchasing the Original Model as a New Purchase.
The risk taken by myself was that the Donor Cartridge could have been rejected for a rebuild by the Technician and the Cartridge Cost and Inspection fee would have been to produce a 'no avail' outcome. 

I have followed a Enthusiast Blog produced by a Cartridge Builder.
There are very nice Photo Records of the Deconstruction and Reconstruction of the Cartridges being worked on.
What is off additional interest to me as a content within this Blog, 
is that the Technician is claiming that many Cartridge Brands are all using the same internal materials as parts.
The Companies are producing the Sonic Differences for their Models are being achieved by the following:
1, Coil Wires used with differing amounts of Windings.
2, Different Gauges for the Metal used as Coil Wire.
3, Different Metal Types used as the Coil Wire.

I will also add that a Cantilever Material, as well as the Cantilevers  Length and Set Up Angle, along with the Cartridge Body Design will contribute to the Cartridges Uniqueness in the Presentation Produced.

I am on board with the Enthusiasts Blog report that there are commonly used materials being seen as the Parts in use to produce a Cartridges Internal Structure.
With this in mind, it does not concern me if a Adept Technician is used as a Third Party Service to overhaul a Cartridge that is wanting.

Maybe a List of Cartridge Brands can be compiled to show would be owners, Cartridges that share a common material assembly for the Internal Structure.
It might help with seeing through the Mystique of the Hype through the Advertising.
In a nutshell, we are going to sell you a 'Bently', but would prefer it,
if it was not known that a Ford / Mazda will be used under the Body Shell. 

I at present have another MC Model Purchased to undergo a Similar Third Party Treatment in keeping with my one in use at present.
I have been offered a Design for it that is almost to my wish list.
I am yet to have the MC Inspected, so the Punt, has still got a few Hurdles to be cleared before the outcome is seen as worthwhile.

There are a few HiFi ideas on a bucket list that will be my Post COVID Projects, off which this is to be one.     

  
  

@pindac why don’t you just name a cartridge you’re talking about? If you upgrading cheap Denon 103 with Conical stylus to Advanced profile on the same cheap aluminum cantilever it will be a huge upgrade in sound quality. 
But it will never happen if your original cartridge already have advanced cantilever and stylus.