Vandys are funny that way. I always had the tilt-back correct on my 1Cs (with a pair of 2Wqs), but I read somewhere that one should also level the speaker out from side-to-side. Since my basement floor is uneven, the speakers were leaning to one side a bit. After I leveled them out, while still retaining the correct angle of tilt-back, the sound stage expanded noticeably in both hieght and width. The 1Cs now do a better dissappearing act than before, and the improvement was quick and free to accomplish.
Vandersteen 3A Sig listening window
The owners manual states that the "6 inch high optimum listening window is centered at 35 inches when the speaker is vertical". Now is that 35 inches off the ground or 35 inches off the bottom front of the speaker cabinet? The reason I ask is because the tip toes add an additional 1.5 inches to the height of the speakers when installed. What I'm looking at can I measure 13 inches off the top of the cabinet and use a laser pointer to mark the exact point of my listening postion?
- ...
- 6 posts total
- 6 posts total