2. digital
  3. 1364228577

Using Oppo 105 for Audio from Cable Box?

I'm thinking about getting an Oppo 105, and using it to do the D/A conversion for my TV audio; i.e., instead of the Comcast cable box or TV doing the conversion. I am using an integrated amp, not an AVR or processor. And using only two-channel sound in my video system.

Does anyone have experience doing this? If so, is the sound significantly better than through the cable box? I would think it would be, but we are talking about audio from the cable company that is somewhat compromised to begin with.

Thanks!
jfz
zenblaster
504 posts
 
I get the best sound by using the direct digital out from the cable box - digital rca patch - Krell Dac - CJ Preamp. It sounds as good as any other digital source in my system. You want to get your digital signal to your best dac, which in your case is clearly the Oppo 105. I think you will be very happy with this arrangement.
malcolm02
43 posts
 
I have the Output from my Comcast cable box going into the coaxial input of my Oppo 105, and the video directly to the TV. It sounds good and works fine apart from one thing - the audio and video are out of sync. Strangely, the delay seems to vary, but at it's worst it is pretty noticeable. Oppo say they are going to address this in the next firmware release, but I thought i would give you a heads up.
jfz OP
570 posts
 
Thank you, Malcolm. Very much appreciated.

Also: I was assuming one could go from the cable box to the 105 via HDMI. I guess not, huh?
kr4's avatar
kr4
3,678 posts
 
Of course, you can go directly from the box via HDMI and that would be the best way.
More to discover