You wrote, "There are a few convenience things that are annoying, such as the decoupled motor which always ends up sitting against the table and needs to be moved." From this I gather that the tt has a stand-alone motor and that it moves during use such that eventually the pulley is in contact with the platter or the body of the motor comes in contact with the plinth. Either one of these phenomena is BAD news. There ought to be a way to stabilize the motor in one position such that it remains stationary at all times. This is a pre-requisite for speed stability. "Fairly decent" speed stability is not good enough. As to your actual question, it seems you are determined to replace your cartridge first. I don't know enough about your tt to recommend that you replace it, but at least set it up for optimal performance before you buy a new cartridge.
Upgrade: Turntable or Cartridge?
I currently own an early generation of the Clearaudio Emotion turntable (no CMB, spiked feet, aluminum Satisfy tonearm). My cartridge is a Grado Sonata1 (new version) Reference (High Output). I'm trying to decide if I should upgrade the turntable or the cartridge, and between the two, which would provide the greatest benefit. My phono stage is the PS Audio GCPH, which I've found to perform pretty darn well, and don't think I need to upgrade that at the moment.
I do feel that the Emotion turntable could still handle a cart a good deal more expensive than the Sonata1. To my ears, the table is extremely quiet, with fairly decent speed stability. There are a few convenience things that are annoying, such as the decoupled motor which always ends up sitting against the table and needs to be moved. The location of the switch to turn the power on, and also the exposed belt can get annoying. However, I'm still willing to live with those things if upgrading the cartridge will provide much benefit. In the end, I'm in this for the sound, not the convenience, otherwise I wouldn't have a turntable.
For cartridges, I was considering quite a range: Shelter 501 Mk II, Benz Ace or Glider, Clearaudio Concept MC, Ortofon 2M Black, Dynavector 20X2 or Karat, etc. I'd like to try out a decent MC for once, if I do choose to upgrade the cart. I've had trouble getting rid of inner grove distortion with the Sonata1 and Satisfy tonearm, even after very careful alignment. Maybe they aren't a perfect match?
Any ideas here?
Thanks
I do feel that the Emotion turntable could still handle a cart a good deal more expensive than the Sonata1. To my ears, the table is extremely quiet, with fairly decent speed stability. There are a few convenience things that are annoying, such as the decoupled motor which always ends up sitting against the table and needs to be moved. The location of the switch to turn the power on, and also the exposed belt can get annoying. However, I'm still willing to live with those things if upgrading the cartridge will provide much benefit. In the end, I'm in this for the sound, not the convenience, otherwise I wouldn't have a turntable.
For cartridges, I was considering quite a range: Shelter 501 Mk II, Benz Ace or Glider, Clearaudio Concept MC, Ortofon 2M Black, Dynavector 20X2 or Karat, etc. I'd like to try out a decent MC for once, if I do choose to upgrade the cart. I've had trouble getting rid of inner grove distortion with the Sonata1 and Satisfy tonearm, even after very careful alignment. Maybe they aren't a perfect match?
Any ideas here?
Thanks