My advice is, if you’re going to change coupling caps, stick with the various film and foil types, rather than a metallized film. They’re generally more expensive (but not always, depending on mfgs), but are of better construction, especially in regards to lead attachment. In a film & foil cap, the foil protrudes at each end of the rolled cap, and the lead is soldered or welded directly to the foil . Metallized caps have the dielectric protruding at each end, so a conductive paste is applied, which makes contact with the plate. The lead is then attached to this paste (a less reliable form of construction).
Be aware that, for equivalent voltage ratings, film & foil types are generally larger in overall size.
Be aware that, for equivalent voltage ratings, film & foil types are generally larger in overall size.