2. pc-audio
  3. 1149558729

Up to the Minute: Streaming Bits to Audiophile DAC

I have some unanswered questions from another thread, and also some new ones despite searching the archives. So I hope this thread might be a good place for all of us who are interested in state of the art audio quality from hard disk drive based files.

Kublakhan in another thread suggested using the Sweetwater Creation Stations as hardware for a PC based audio solution and so far this gear looks pretty good to me.

My questions, however, arise from the fact that there may be some disconnect between the conventions for "pro audio" and "audiophile" audio.

So as of this writing, can anyone please explain:

Why does every pro audio person seem confused when I tell them I want to use an external DAC?

What is the BEST way to extract bit for bit data from a hard drive, to export to an audiophile DAC?

Why oh why do expensive $$$ music or media servers, which are supposedly configured to optimize audio use, nonetheless require some sort of cheapo "interface" to stream the data into an audiophile DAC?

Why on earth would I want to buy an audiophile "sound card", which I presume (in addition to an "interface") also has its own DAC?

Given the options which are available for "sound card" and/or "interface" type devices, what is the BEST way to tap the bitstream and/or maximize performance of the audiophile DAC? Optical? TOSLINK? Spdif?

Given the choices I might have for the "interface" between the computer and the DAC, what is the BEST way to minimized "jitter" or other audiophile nasties? Or is that phenomenon more of a downstream issue AFTER the bitstream hits the DAC?

There is a lot of great information in the other threads about ripping, tagging, Foobar vs Itunes and a million other complications of hard drive based audio.

But for now, I would really appreciate just some basic, conclusive opinions on the best way to get bits off the hard drive and safely on their way to my speakers from an audiophile DAC.

Please advise.

THANK YOU.
cwlondon

Showing 3 responses by racerxnet

racerxnet
54 posts
 
Jitter is dependant on the last out device to the DAC. How the DAC handles the jitter depends on the build quality. Bits are bits, period. Whether SPDIF or Toslink does not matter to the DAC. If there is electrical interference, that is a different ball game. If you are concerned about noise from the PC, you can put a ferrite core on the cable to the sound card. Use a Toslink or SPDIF cable to the DAC. That should eliminate the interference problem for the majority of users. The Red Book standard is 44.1 and the upsampling can be done with the external DAC. My Tri Vista 21 samples 96/192. Bit perfect output via my Chaintec 710 card has been verified by me. Foobar kernel streaming bypasses Windows Kmixer, as well as ASIO drivers. No need to get expensive sound cards, unless you are using the onboard DAC's from the card itself. Otherwise the external DAC is useless when using analog output from the sound card. Foobar is free and quite easy to set up. It is convienient when playing music, as it is all in front of you with just a click away.

PC built by me.
Tri Vista 21 DAC
Toslink connection
Levinson Pre
Levinson 33H Mono Blocks
Genesis 201 4 column speakers w/ 1000 watt Amp
SDI modded Apex DVD player and Sampo firmware
2 Ehome 8500 CRT's blended

One hell of a setup that sounds and looks fantastic.

MAK
racerxnet
54 posts
 
Cwlondon,

I never looked into using a USB device or any other regarding the output to the DAC. There is no need when a capable card is able to output a bit perfect stream. With Foobar or an ASIO plugin you have eliminated the Kmixer in a windows based system. I am using a Chaintech 710 card which costs about $27.00 at the local computer shop. I output using a custom optic cable from Fiberfin. This goes to the digital lens which eliminates all jitter and then to the Tri Vista.

If your the you chose has a buffer it should be able to stabilize the jitter timing and provide the rich satisfying music we all strive for. As for the choice of DAC's, there are many which cost much and sound mediocre. Let your ears decide what you like best.

Building a PC is quite simple and straight forward. Just be sure to get a case which allows room to route the cabling. Most full size ATX boards with PCI-E are going to do the job without breaking a sweat. Your choice of AMD or Intel. If you are using the PC as a HTPC the get the fastest processor you can afford. This is where horsepower will pay off when decoding HD content.. especially when running ffdshow.
racerxnet
54 posts
 
Quit your whining and show some proof that the jitter is still present. I guess Arnie and gang is is a fool for creating such a product. Several write ups confirm that the jitter is reduced consideralby, to the point of nil. If you are hawking your own product, I'm not convinced it is better than what I have currently. Other than that I'll continue to measure with my equiptment and evaluate with my ears. As a software engineer I am aware of the limitations from electronic devices.

Best of Luck Steve
More to discover