I had the MA 6450 and the meters come in handy to the extant that you know when you are coming close to overdriving the amp. As far as reading them, the 6450 has an 8 ohm and 4 ohm overlay. You read the top or bottom, depending on the impedance of your speakers. It's close enough to tell what is going on. Plus the powerguard is nice. You should see the red lights flash if it's protecting it from clipping.
Understanding Mcintosh Meters?
This is probably a stupid question, or atleast one I should be able to answer myself, being that I did graduate with a degree in computer engineering, but I recently got a mcintosh ma6450, and was wondering how I make sense of the meters. I understand what they measure, and what it means, but how do i know when I am close to clipping.
Let me explain further. the amp is rated 100wpc, in to 4 ohms and the meters read from .01 to 100 watts with the final mark being 200 watts. But what if my speakers are 8ohms? I know that means my amp produces about 50 watts in to 8ohms, but does that mean that I can only take the meters about 1/2 way before I will clip, or do I go by the decibels, meaning 0db is really the max before clipping, only instead of producing 100wpc (0db corresponds to 100w watts on the meters), the amp is only producing ~50wpc since the speakers are 8ohms.
Hope I explained my question well enough. Thanks for your help.
Let me explain further. the amp is rated 100wpc, in to 4 ohms and the meters read from .01 to 100 watts with the final mark being 200 watts. But what if my speakers are 8ohms? I know that means my amp produces about 50 watts in to 8ohms, but does that mean that I can only take the meters about 1/2 way before I will clip, or do I go by the decibels, meaning 0db is really the max before clipping, only instead of producing 100wpc (0db corresponds to 100w watts on the meters), the amp is only producing ~50wpc since the speakers are 8ohms.
Hope I explained my question well enough. Thanks for your help.