TW Raven Owners: Set Up Questions


Through the magic of sweet talk, I turned my Orbe into a Raven and mounted my Graham 2.2/Benz LP.
I am looking for a isolation base for the Raven. I have a 1 3/8" piece of granite coming soon so I can ditch the MDF I use now (a temp. meas.!) Symposium, SRA, HRS, etc., can anyone share their experiences with isolation bases? I saw the thread about loosening the Stillpoints.
Initially I had an issue with using the rough side of belt. The belt shimmied up/down on the pulley at a specific spot on belt. Also, the speed fluctuated and I could never get it dialed in with the PSU. So, I went to the smooth side of the belt and then raising the back side of the motor (unscrewing one of the isolation feet) slightly moving the belt down from "center" on the pulley. This moved me from 33.2 to 33.3 and I have no more belt shimmying and the speed is rock solid.
I'd appreciate any tips/tricks etc.
gerardff

Showing 1 response by whart

I use an HRS platform for my table- a big Kuzma that weighs about 160lbs. It will not isolate footfalls from a springy floor (which required more work including isolating the big antique table on which the whole affair sits). I would have preferred a wall shelf, but that wasn't feasible and would have required some real re-engineering, both of shelf and of system layout. The Stillpoints do a great job in decoupling vibration, but they are not really meant to address more dramatic movement like floor flex/footfalls, right?
(I have some ultra SS under one component and like what they do sonically).
Finite Elemente made a big shelf for wall mounting, but it ain't cheap. (The Living Voice folks seem to use those if you can find pictures of their factory listening room).