Travisg,
You will enjoy the Townsend. I have a bunch of those cork/rubber blocks. They are OK...but in a different league. And I also have the maglev platter on my table and it's all on a Salamander rack. A bit of overkill.
Happy Listening
@elevick have you tried Mapleshade’s complete vibration control system with the wooden platform and the brass footers along with the cork/rubber blocks? I am not suggesting that the blocks alone are adequate. Not that a VPI table really needs more mass, but the wood platform adds significant mass in between the blocks and turntable feet/brass footers that helps reduce vibration coming from both the table and from the floor/room. It is also both less expensive and less elegant than the Townshend platform, which is within the OP’s budget. But some folks may like the quaint funkiness of the Mapleshade design. kn |
I hate to say I told you so. Sorry about that. I guess I did not comment until after you had ordered the Townsend. All those feet thingies are also garbage. To properly isolate a turntable the suspension needs to be tuned below 3 hz, three bounces every second. That is so slow you can count it. Try this experiment. Put the turntable on the floor. If the footfall problem improves at all a shorter more stable rack will also improve the problem. Then down the line you can either replace the floor or get a Sota Sapphire, Nova or Cosmos. Easy choice I think. Hanging the turntable is another viable solution. People laugh at it, but it will reliable vanquish the footfall problem. All you need is a drill and a ladder. Get a big butcher block carving board, 8 hooks, chains and turnbuckles. |
Knownothing, I haven't played with the Mapleshade system. I'm sure it's in the same price realm as a Townsend but a lot bulkier and way flashier looking. Those cork & rubber blocks are ok but most of mine sit unused. Mijostyn-Hanging a table, really? Swinging in the wind... You would love my Sota, bring a bowling ball and pins. See if you can get it to skip. I dare you.
|