Tube then Class D


Dear wizards: 

If I take a Willeston Tube amp and use it as a phono preamp them run it thru my old NAD M2 class D amp will I retain the tube warm when I get to my magnapan 1.7's?

I have my VPI Scoutmaster in for repair and a new Grado Sonata cartridge and a new pre-amp a SHIIT Mani2.  My question is, prospectively,  is IF I were to use a tube amp something I can afford (Willeston R8)  Will the class D mask out the tube warm.   I has also have two PSB subs

Is what I am thinking even reasonable or doable?    I'd rather hear the laughter now than my crying after paying for a tube pre-amp.   

Thanks in advance for any insights.

Joe M2

 

128x128joem2

That Willeston tube amp has an output impedance of several ohms. It will interact with any speaker's impedance curve and act as a tone control. Do you really want to subject your music to a tone control you can't turn off?

Joe, lots of people soften their Class D with tube preamps, so that is doable, but I don't see how you can use an amp as a phono preamp. Initially I thought you were going to use the preamp section of the Willeston into the class d, but it looks like there is no pre-out only a pre-in, so that won't work.

The cheapest tube preamp I would recommend is the Quicksilver. 

 

Okay a tube pre-amp could be used.   But a tube amp cannot be used.   I was under the impression that tube amp and in this case a tube preamp has a different sound.  Sometimes described as warm, with better holographics, better soundstage, warmer sound in the mid range.  I just thought maybe the tube characteristics would be eaten by the digital.   So why waste a grand or more if the sound quality is not more pleasing.  I might as well  just keep the $200  mani2  and spend a grand on vinyl.

You MUST have a phono pre-amp. It can be separate or built in but you need one that translates the input signal into the corrected RIAA curves.