Tube Rolling Advice for the Backert Labs Rhumba Extreme?


Tomorrow I have a Backert Labs Rhumba Extreme 1.2 being delivered, which has been upgraded by Backert to 1.3 specs. It will be driving the Luxman MQ-88uSE and the front end is a Qutest with M Scaler (Innuos Zen MK III server/streamer). Speakers are La Scala IIs, placed about 15' apart in the corners at a 45º angle. Soundstage is excellent and expansive with remarkable placement of instruments across the sound field.

If all goes well it will be replacing my L-509X, which is currently only being used as a preamp for the MQ-88uSE, so it’s being underserved in my system and will need to find a better home.

I am interested in any advice about tube rolling with the Backert Labs pres. With the Chord digital front end, I am getting a very layered, dimensional, detailed sound and thanks to the Qutest filters I’m able to adjust filters to best match the amplification. The MQ-88uSE has a gorgeous, full, warm sound and right now the 509X’s solid state pre is giving a nice sharp, detailed, and dynamic profile to sharpen up the tube sound a bit.

I don’t want a syrupy or bloated tube sound, more airy and detailed on the top with holographic imaging with solid heft on the bottom end. I’ve replaced the preamp tube in my Cronos Magnum II with a Cifte and was really happy with the impact on the sound.

The Backert comes stock with new Mullards, which I expect may have a slightly warmer sound than what I’m chasing.

Any advice?

128x128Ag insider logo xs@2xjsqt

Showing 1 response by chilehed

Hi jsqt,
I upgraded from the Rhumba 1.2 to the 1.3 Extreme a few months back and happier I could not be. With both of these units I saw a marked improvement in sound after just 30 or so hours with the stock tubes. Andy Tebbe at Backert mentioned it would continue to improve (and I believe it has) but around the 30 hour mark is where I saw the most dramatic change. In regards to the bass, tubes can definitely influence that but I would be patient and let it play out. My 1.3 Extreme had plenty out of the box with the stock Mullards. In terms of tubes, I have tried a bunch, most NOS including Raytheon, RCA, CBS, Mazda, Tesla, Mullards, Amperex and I am sure there are a few others. All of these were rolled in my 1.2. As @jackd mentioned, the Raytheons and RCAs are fine tubes if you happen upon some good ones and they can be had at very reasonable prices. I ran a pair of Raytheon triple mica's before I splurged on a set of early 60's Bugle Boys which were my favorites until I tried a pair of late 50's Amperex 7316s which are the bomb in my setup. Personally I would heed the advice given earlier, take your time and enjoy the ride. Everyone's system, room and preferences are different so what works for one person may not work for another. I think finding a good source for tubes is key....you can try ebay but that is a real crapshoot and you need to read the fine print. Personally I have had great luck with Brent Jesse and I am sure other dealers mentioned are also very good. Congratulations on the new acquisition and good luck on your journey!